2. tech-talk
  3. 1382443081

NAD M2 "Protection ,right channel short"

Just took delivery of this used integrated yesterday . Hooked up and listened for two hours .The amp went into protection stating the message right channel short . No wires were crossed or connections were changed . I had noticed the imaging had started to move left previous to the shutdown .I restarted the amp it worked fine for another hour .I then shut it down and went to bed.At the time of shutdown I was playing Peter Gabriels Love To Be Loved .That song is very dynamic in terms of quiet to loud passages and I always find I turn the volume up pretty good . Can loud volume cause a short ? Should I send the amp back to the Brick and mortar store I bought it from .
128x128maplegrovemusic
zd542
5,339 posts
 
"I had noticed the imaging had started to move left previous to the shutdown"

That's because when the right channel went into protection mode power was reduced to that channel. Since the left channel didn't go into protection, it was putting out more power than the right. That's why everything moved to the left. Kind of like a balance control.
maplegrovemusic's avatar
maplegrovemusic OP
1,113 posts
 
It was purchased used and is about 4 years old. The same thing happened tonight . Turns out volume has nothing to do with the shutdown . Running time of the amp is the culprit . Shut down 2 hours in which is about when it shutdown the previous night . will be speaking with the owner of the store today . I am confident they will resolve the issue .I must say that it is the best sounding amp/pre I have had the pleasure of hearing .
foster_9
1,638 posts
 
Your dealer needs to make it right.
timrhu
2,779 posts
 
Send it back immediately.
maplegrovemusic's avatar
maplegrovemusic OP
1,113 posts
 
Update on NAD M2 . Turns out it was a bad rca cable which had its internal wires touching . Thank god it was not the amp. Will be saying a prayer for a long healthy life for the NAD .
More to discover