Plinius SB 300 v Plinius SA 250 MK IV


Have any of you heard first hand the SB 300 (V) the SA 250 MK IV?
I'm curious as to which amp you liked better and why?
What's the difference between the two as far as Sonics?
Thanks in advance, for those that can help me.
128x128Ag insider logo xs@2xlak
It will be good to test the sa100 vs the sb300 before you sell it and also let us know.
I have been a tube amp guy since 1986 and bought Harbeths a few months ago. They need more current than my Air Tight 300B can give so I bought an SA-50III. Maybe it's the Harbeths but I didn't know S/S could sound so good. Then again, maybe it's the Plinius.
The Plinius is very tube-like. My reference system consists of the Cary 2A3 monoblocks.
I had cary 2A3s 5-6 years ago but could not find a speaker that worked. The Cain & Cains were not available then. I found the Air Tight had enough oopmh for many more speakers. I also had Cary 572s which were really good sounding but those damn tubes died every 6-8 months.
Here’s the follow-up to my posts:
I received my Plinius SB-300 today. After setting it up and cleaning all contact areas with “Kontak” and then spraying with “ProGold G5”, I powered up the amp.
I was cautioned to give the BS-300 a good 30 days to reach it’s full potential (as was already my rule of thumb) I’ll leave the SB-300 on 24/7.
I think the Plinius SA-100 is a damn good amp whether running it in AB or A mode however for this comparison the SA-100 was warmed up and operating in A mode. The SB-300 was set up out of the box and I heard the following from the SB-300 as it’s been playing now for 2.5 hours and sounding improved the longer it plays.
The following are the immediate improvements:
1) More bass slam with a greater bass range.
2) More resolution overall.
3) Greater attack and improved details and imaging.
Associated equipment:
McIntosh MR 80 digital FM Tuner, Dodson DA-217 MK II D Dac, Sonic Euphoria passive preamp,
Wadia 20 Transport, Legacy Signature III speakers, Harmonix HS-101 GP interconnects, Harmonix HS-101 SLC speaker cables, Ridge Street Audio MSE Gen. II Digital Link Interconnect, Porter Port cryo’d Hubbell 8300 AC outlets, Electraglide Ultra Khan and Mini Kahn Plus power cords. My own power filtration system with two dedicated lines (pictures of power filtration system available on my system on Audiogon).
Best regards