2. amps-preamps
  3. 1130532275

Plugging an Int Rec Pre-Out into another receiver?

I am thinking (in my setup) of plugging the pre-outs (for Left and Right channels) of a Surround receiver into a Lin-in on my stereo amp for left and right. This way the surround receiver only powers the rear speakers and my good music integrated poweres my good main speakers.

Can I do this?

Basically I am thinking of picking up a cheap (400 or less) surround receiver so I can run it in 4.0 mode (2 good fronts and surrounds for effects/sports). I dont want to mess with my stereo rig and I thing this will let me achieve what I want with an integrated stereo unit.

I want to make sure I wont blow anything up and I dont really care if the surround isnt "true".
shawnparslow
chadnliz
3,736 posts
 
If you have a surround pro there is no need for a refrence volume, simply adjust levels in the reciever menu, Kal is IMO makeing it seem harder then it has to be.
kr4's avatar
kr4
3,677 posts
 
Sorry chadnliz, but without a fixed VC setting on the amp, he will need to rebalance the channel volume settings on the receiver every time he uses it. Remember, it's an integrated amp, not a power amp.

Kal
sogood51
2,157 posts
 
I had my system like this at one time...Kal is correct. If you knew were unity gain was (which you don't)...that would be the best set point.

Try the halfway point...worked well for me.

Dave
shawnparslow OP
23 posts
 
Thanks guys ...I'll have to find a good level and use it when I listen to theater. I am moving to a place that has in-ceiling surrounds that I wouldnt mind using for sports/movies but I didnt want to have to work real hard to work them into my rig. The main thing is I just wanted to make sure I wouldnt damage the stereo integrated.

Thanks fo your help!
chadnliz
3,736 posts
 
sorry, I guees I was wrong
More to discover