Do tube dampers improve sound?


I recently purchased a tube pre-amp and several NOS 6922 tubes (EH, JJ Tesla, and Philips). Should I consider buying tube dampers? Do they really help the sound? Thanks
128x128vlad1456
Using the Halo's is more like an art than an exact science. There is no real formula or equation for success. You have to play round with them and see what, is any position, works best. They may only provide minute improvement or could make a huge difference based on a number of factors.

I was told by Brendan at Tube World to think of a tube like a car antenna. Closer to the base the less flexible it is. However, closer to the top is where it is most likely to sway. That is why a lot of these tube tweaks seem to work best at the top of the tube. I use my Halo's about a third of the way down from the top. Best results have been with my phonostage. They did not affect my tube preamp as much.
Steve, thanks for allowing me to return the teflon tube dampers and exchange them for the nickel dampers. You have integrity that is too often missing in high end audio.
I also enjoyed talking audio with you for at least an hour
when I purchased your grungebuster. Your grungebuster was the most effective tweak I have ever tried and an incredible bargain. I had upgraded my preamp to the CAT Ultimate MK2 and my DAC to the Audiologic 24MXL just before purchasing your grungebuster. That tweak was a greater sonic improvement that the $11,000 upgrade! Thanks again.

Bart
I use Herbie's on the input 9-pins of my VTL mono's and like what they do, regardless of whether the tubes seem overtly microphonic or not (as determined by the tap test). The dampers help with better articulation of vocals, for instance, with less sibilant edge and more palpable image focus/dimensionality; give a clearer, 'calmer', more naturally stable soundstage that's less perturbed by what's going on musically; lend better purity, indivuated tonality, and detailed realism to cymbals; and generally reduce a slightly forward excitability in the presence range, making listening easier at higher volumes. As these symptoms are all things which can be attributable to resonance in tubes, I'd say the dampers do their job -- you hear the tubes less, the music more. I don't think this effect is necessarily unique to Herbie's product vs. the soft rings made by others, but his are probably easier to move and remove, don't bind to the tube, look nice (if your tubes are in view), and still fall under the catagory of "cheap tweaks". Not a dramatic improvement for me, but easily more than worth their small cost.

When I ran a tube preamp, I didn't have the Herbie's, but tried Pearl tube coolers with the woven graphite undersleeves. This product probably works for reducing heat build-up (I also used them on some power tubes, but can only guess at, not measure, their effectiveness), however I wouldn't look to the Pearls as an anti-resonance treatment for small-signal tubes. If anything, they are prone to making 9-pins sound more resonant, not less, and these tubes generally don't produce enough heat to make any reduction worth the cost or sonic tradeoff. No audible problems when used on power tubes though.