To Plug Power Amps Direct in to Wall or Not ??


Hello .
I own a number of different power amps. PASS, THRESHOLD and MACs. I have dedicted rooms for each system. And no appliances are tied into the circuits I am using for my equipment.

BIG Questions??

Should you plug power amps directly into the wall or use some type of surge protection ?

Is it safe without protection on power amps even though they are pretty hardy and not sensitive like digital gear ?

I do notice better performance on the power amps plugged directly into the wall. But I am scared of the common surge , brown out or electric goes out may fry my amps.

Or am I being too much of a worry wart.

Thank you to all.
BOB
lawyerman
I plug mine directly into each amp's dedicated line. Surges etc. are a conern, however there are few "protective" systems made that will not impact your amp's performance. A friend and I have tried various products, which at first we think made a marked improvement, but after listening to the system with protection, then switching back to a direct connection, we've always found the direct is better. Then a few months latter, we'll try another scheme to improve the sound and have repeated our findings. There are places in cities where the electrical lines indeed sound trashy because of to high a load, noisy transformers, etc, and for these areas I'm sure the surge protection schemes may improve the electricity so much that filtered sounds better even with the current limiting factors these devices seem to impose. If you live in the heart of a city with lots of industry and heating cooling needs, you may want the protection of line filters/regenerators. If you live in the suburbs you may have similar findings to mine.
If you listen late at night, you'll almost always have better sound.

Good listening,
Sgr
My Pass dealer told me to do so (right into the wall), as recommended by Pass. Sure enough, all surge protectors or AC filters I tried made my X350 sound compressed. I have discovered the same is true with my Edge NL12, which is now also right into the wall. (My source components, however, benefitted from being plugged into my Hydra 8.)
I have never had a problem in my house with this arrangement.
It's perfectly safe to plug the amps straight into the wall, especially on non-shared circuits. I prefer that approach to most "power conditioners" that tend to screw up the detail or the dynamics or both. However...

I have discovered that an IsoClean power filter can improve the sound even on a dedicated circuit. They're just filters though, so they don't do regeneration or surge protection. However, given the quality of the power in most of North America these days I wouldn't worry about the really bad stuff too much. Unplug the system during wind or electrical storms and you should be OK.
Bob, The issue is also SOUND. Maybe start there! In my experience, various amps react various ways to various power conditioners or regenerators (helpful, huh?) I had a tube amp in our last house on a Power Plant (PS Audio PP600)and it was better that way. Here, in our new house with dedicated circuits, I thought the amp was better into the wall (Porter power ports for plugs.) Having tried several Class D amps, I found they also preferred the wall to the PP600.

I share your concern about power problems. But as they say - there's always something. I don't listen in thunder storms, and kill the circuit breakers.

Maybe think about a Shunyata 2 outlet deal for your amp - I believe it has protection - or a PS Audio Ultimate Outlet or whatever else they have for that purpose.

Good luck!

Bob Wood
http://www.GreatHomeTheater.com