To Plug Power Amps Direct in to Wall or Not ??

Its a rare occurrence for an amp to get fried from a surge, but it DOES happen. There was a guy who's entire system was fried from a lightning storm when he was not home. In my experience there is no solution other than taking the risk (which, again, is rare) or compromising the sound to some degree. I tried a Brickwall surge protector designed specifically for amps. It did not constrict dynamics, but there was an ever so slight loss of clarity. The Brickwall had two plugs and I found that only one component could be plugged in or the sound became too veiled. The loss of clarity is ever so slight, but the protection it offers is beyond compare--so I live with the compromise. Brickwall used to offer a 30 day trial period, but not sure if they still do; you may want to check it out. The only real downside/limitation with the Brickwall is that it does not allow for a change of its power cord (something I didn't even think about when I bought, but now wish I did; of course, but you could always DIY it to accept different power cords by installing an IEC receptacle, but this would void the warranty). I have tried many surge protectors and would recommend the Brickwall out of all those I've tried, but it does come with compromises just like the rest of them, just less. Lastly, there are some that say there are ordinary spikes that occur on a daily basis that don't necessarily hurt your amp, but do add stress to your components and can shorten the life of equipment. Just thought I throw that in there to give you (and me) one more thing to worry about. I too am a worry wart

This is simple:

If you have a decent amp, you will always plug you amp directly into the Wall.

If you want it to sound better get an electrician in and get a dedicated line.

If you want it to sound even better, have the electrician run an Isolated ground, that consists of a dedicated Ground wire not connected to your water pipe, or your fuse pannel, but have it run outside to a copper rod, that is burried in the ground.

Industry experts have long been proponents of this type of setup, because of the isolation from other appliances that generate noise.

Enjoy!

My whole house surge protector is not sensitive enough to cover small "issues". Regardless of sound quality, I'm using a surge before my amp. I can get used to a miniscule amount of sound problems vs buying a new amp.

And, YES I have had lighting strike the house more than once. Last time if fried my whole niles system!

"I can get used to a miniscule amount of sound problems vs buying a new amp."

On the other hand, what better excuse could there possibly be to upgrade????? You could say: "Honey, the urge struck me like a bolt out of the blue; now I'm thundering mad and going to storm off and buy a new amp."
OK, maybe not.....