Ayre / Aesthetix hum problems?


Hi. Does anybody know if matching an Ayre V-5xe power amp with an Aesthetix Janus/ Calypso tube pre-amp causes hum due to ground loop?
Thanks.
frankpiet
The "e" upgrade improves the sound quality of the K-5x noticeably. Whether or not this will result in sound that you like is only something you can say. As always, the best way to know is to try it for yourself in your own system.

In another post you noted that the Nagra preamp also lacked "warmth" and "body" in your system. I don't have direct experience with the Nagra, but the fact that it is a tube-type preamp would suggest that there is something else in your system that is causing the lack of "warmth" and "body".

In these situations, I normally look first to the tweaks and fine-tuning rather than the components themselves. It is important to make sure that the AC polarity of each of your components is correct. I believe that you are in Germany (Schuko plugs), so this is much easier than in the US.

Floating the units (disconnecting the AC mains ground) also can result in significant improvements in sound quality. (Ayre equipment made in the last several years does not require floating, as there is no connection to the AC mains ground.) However, please note that floating the ground connection can increase the risk of an electrical hazard in certain very rare situations. Do this step at your own risk.

Use of wood blocks as supports under all of your components (except loudspeakers) is highly recommended. Also use wood blocks under all cables, interconnects, and power cords that may be resting on the floor. This is especially important if your floor is carpeted.

Soundstage depth is usually improved via speaker placement. Check the Cardas web site for instructions on how to use the Golden Ratio to place your speakers.

Finally, many cables can cause the symptoms you have described. It may be worthwhile to try different interconnects, speaker cables, and power cords in your system.
Charles, thanks a lot for your input, which I highly appreciate! I´ve checked polarity - o.k. All power cords (Electraglide Epiphany) are of the ground. My equippment is resting on Stillpoints and has got rose quarz and Shakti stones on it. The V-5xe is directly connected to a HMS wall socket.
I´ll try to audition a new K-5xe as I want to build a musical pleasing system around the V-5xe and my Ayon Seagull Ceramique speakers.
Does it degrade the sound quality if I would pair eg. the V-5xe with an unbalanced tube pre amp eg. CAT SL-1, ModWright SWL 9.0 SE or First Sound Presence DeLuxe? If so, in which degree?
Whith which tube amps have you/your customers achieved great results?
Just bought a new K-5xe and preferred it in some areas to the Aesthetix Calypso - which is of course a mighty fine product as well. By the way: NO hum problems with Ayre + Aesthetix.
I have a buddy I met here on A-gon who likes his Aesthetix Calypso so I thought I'd take a chance on one. If any of you who own the Ayre V-5xe and have had reservations (as I did) about hum issues with a Calypso, this problem has been solved. Thanks to Charles post above, I sent mine back for the 'M' upgrade. End result: no hum, no noise, no problems. The Calypso is just breaking in, but it seems to be a great match with the Ayre V-5xe and Ayre C-5xe. I'm happy as can be.