Looking for a Little Help...

FWIW, in addition to the suggestions above,I would suggest that you explore some very good quality and inexpensive speaker cable and then you have, at least, estblished a benchmark for auditioning better/more expensive stuff later on.

Lacking knowledge about your amp or speakers and any special needs you might have, cable wise, I would suggest something that many users on this forum have tried and liked, Canary Star Quad (I think I've got that right). I think its constructed out of 4 14 guage twisted copper wires with a total guage of 12. You probably won't dislike this cable in your system and in fact you might like it well enuf to stop searching for some time to come. I've use it in a 2d system and am quite pleased with the price/performance ratio.

Canare

Search for Wegryzn on the 'gon. I am using his Copper slams with great results and he's quite knowledgable (and reasonably priced).

Good luck,

I would second Newbee's recommendation of the Canare StarQuad 4s11. Do a search on it here and you'll find a number of discussions.

You can find it at Markertek for $69 cents a foot but there are a number of other sources for it online, as well. If you go to Markertek's home page, type '4s11' into the search box and it should come up (their site is so vast and their search engine is so lousy you might not ever find it, otherwise.)

The 4s11 contains four individual 14 gauge wires and if you're going to use it for single wiring rather than bi-wire you combine the two whites for negative and the two reds for positive, giving you the equivalent of 11 gauge wire.

If you don't need anything that big, there's also 4s8 and 4s6 that are small, and cheaper.