Von scheikert VR4jr what are you using ?

Shame that you don't have a larger room, as they really open up when moved out from the wall. I suggest that you use some type of sound absoption panel behind each speaker against the wall. Sick some large couch pillows there & it will give you an idea. You might also try to pull them out an extra 1.5-2 ft and toe them in more, either of these could make a nice change to overall sound. I've had them for more than a year and can suggest that you load with 25-35lb of lead shot in each,biwire, & use the spikes.Mine have sounded excellent with both Wolcott p220 & Van Alstine 550exr. Good luck,they are great speakers.

the results are in... the idea about the upper bass driver not functioning off the BM's upper post is accurate. I'm still in awe... I am sure big enough to admit a mistake... I need to now, and I apologize for any issues I may have caused.

Who'd have thunk it?. Although what I posted above previously, is/was in fact the info given me and what I didd... I can only think that I must have left the sub on during the testing... but it's TRUE. THERE IS NO SOUND TO BE HAD FROM THE TOP DRIVER IN THE BASS CABINET BY USING THE 'INTUITIVE' CONNECTIONS (or upper posts on the cab), AND I'M SURE SOMEONE HAD A GOOD LAUGH ABOUT THAT. I know I did... shortly after the discovery. Amazing!

...and thanks for telling me. The good news is I used another pair of those gizmos to make the bi-wires into standard ones and hooked the Sig 10's solely to the TM. after some short time of stridently etched sound, (further proof the driver was not presenting a load), as the second leg of the biwire ran in some more. The sound became quite interesting. I am more than pleased with the TM's performance now... BUT there is a disparity down below. Although improving, the bass no longer is quite at the level of performance as the top & mid. I'm gonna attribute that to using a step down in speaker cables from the Sig 10's. So in fact I do have a pair of wires to put on the block so to speak... anyone got a pair of 15 - 16 ft. Sig 10 X2 actives for sale? Geeezzzz.

I do appreciate the input, however. I do apologize again for my errant info. It was not meant to mislead or cause harm in any way shape or form. Just shows to go ya, even at higher levels some folks are occasionally a bit off the mark.

BTW... the plates are still off. I've hooked to the lowest posts only with the Alpha Quad actives.

I'm using a SF Line 1 tube pre and H20 S250 Sig. ICE amp. I've been content with the sound ever since I bought them over a year ago. I'm also constrained to a short distance from the back wall. I've decided to hold off on dropping a bunch of $$ into the system until I can get everything into a dedicated room or at least an area where I have more flexibility. Hopefully soon. I've become convinced that once you get to the type of system that most of us have, the room and setup is just as important as anything else.
I heard them at my dealer's with a big pair of Classe mono's. The sound was crystal clear, but as I remember it not much warmth. A good deal of that impression came from what I was switching from and the type of music (rock) I was playing. It revealed all the flaws, sibilance, etc in the recordings that I never heard before.
I'm a very happy owner and feel I can build around these speakers for quite a long time. Hopefully I'll be off this silly merry-go-round by that time.