What new amp for my Merlins


I asked this question about 6mo ago. A lot of you told me to get the X upgrade first, I did and what a great improvement. So now I ask the same question again.
jaydiane
Spencer,
I have talked to Bobby quit a few times and ofcourse when I was I was there. At the top of his list, #1 is Joule, then in any order you will hear Berning, CAT, Atma-Sphere etc.
The only one he is running in the shop is the one he is inporting(do not remember the name).
I want to thank all of you that have responded. The one thing that is holding me back on the Joule is the heat down here in central Florida. In another thread I mentioned heat, he said open a window. Today that would be letting in 90 degree, humid heat.
Thanks again, Jay
If heat is an issue, the Berning is the way to go. It runs cool, takes up little room, and tubes last much longer than almost all other tube gear.
Berning gear also holds its value nicely, so you won't have a lot of risk if you decide to move in a different direction later. Cheers,
Spencer
Jay,
I had a stereo Berning that I used with 3 different preamps. First, I had a Cary SLP-2002(very flawed). Then I used a Joule LA-150(paired w/Pentagon PS3 phono stage), CAT SL1 Mk III w/internal phono, finally a Joule LA 100 mk III(& OPS1 phono). Others have reported First Sound preamps as a good match, too.
The LA150 had the best line stage, but phono performance drove my changes. Severe unusual RFI issues in my new room led me in another direction(i.e. all balanced gear), but that shouldn't affect your thinking.
Feel free to contact me offline if you'd like to discuss by phone. Cheers,
Spencer
I called Bobby and gave him four choices that I had, not including Joule-Electra, and hands down it was the Cary V12R. He recommended the Six Pacs as well, but I wanted the 100 watt UL option. I drive mine with Raytheon 5751s instead of the 12BZ7 (black plate, windmill getters) and a First Sound Presence Deluxe Mk II ... a killer combination for my TSM-MMs.