Isolation platform for the power amps


Hi, I have Odyssey Stratos Power amp. at present, it is on the rack. In future, it plan to have Mono blocks and may put them on the floor. Which isolation platforms is appropriate? Not looking for extotic > $ 150 ones ! Thank you.
vishalonly
Try 1" MDF with large brass spikes... or layered thinner stock. These work the best for a low cost DIY solution.

You can also look for a few 18" x 18" or 21" x 21" granite tiles and layer them with thin rubber in-between and add some spikes or footers.

If you are ever in the market for $150+++ let me know :) LOL
So what do you guys use to isolate the mains, drives, airborne vibration,as well as internal self induced resonance from the device you are currently isolating? Tom
I have a cheap alternative. It's for a hybrid isolation platform you can experiment with to see what works for you. you can take apart and redo with the parts until you get what your after. Start with two 18"x18" granite or slate tiles from your local big box hardware store and some duct tape. Space the tiles with wood blocks or whatever you have to the width you want. Then fill with sand/shot or a mixture Also try brass rods or slugs. Then tape the end closed. Add a layer of wood to the top or not, and just experiment. If you find what works and want a pretty one. Contact me! I would add pics of a couple of my designs but I don't know if that's possible or allowed.