Rowland Model 6 monoblocks - my thoughts


I promised John (Jmcgrogan2), that I would share my thoughts on the Jeff Rowland Model 6 amps that I purchased from him. If you are interested...read on!

Some background: I have always been a tube guy. In fact this Rowland is my first solid state amp. From Conrad Johnson, Cary Audio, VTL, Audio Research, and Sonic Frontiers, I've had some damn fine tube gear in my house! As is so often the case with this hobby, I took a trip on the dreaded audio avalanche; buying, selling, trading, and testing various components. Each time, convincing myself that it just wasn't right. Always, that little voice kept pushing...just buy "Brand X" cable, or "Brand Y" isolation feet, and use "Brand Z" vintage tubes, and the sound will magically transport me to some sort cosmic neverland! Little could I appreciate, that I was probably already there. In short, audio-nervousa was getting the better of me, and I lost site of the goal: enjoying recorded music. I decided to take a step back from this madness and start over...SLOWLY...MORE BUDGET MINDED...NO GIMMICKS. This time I would do a better job of managing, balancing, and accepting compromise. And above all else, I would just enjoy the music.

So for the last five years, my simple and basic system consisted of:

*Conrad Johnson Premier 11A 70W tube amp
*Conrad Johnson PV 10B tube preamp with phono stage
*Electrocompaniet EMC-1 CD Player
*Technics SL1210 MK2 turntable that I've kept as a spare from my DJ years in case I get a hankering for vinyl. I Sold my SOTA, due to lack of use.
*Harbeth 7ES2 speakers
*Kimber Kable PBJ interconnects
*Speltz Anti-Cable speaker wire

A Sam Tellig or Harry Pearson reference system, the above components do not make. However, this time that wasn't my goal...I just wanted to listen to music instead of worrying about $3,000 speaker cables being the weakest link. And to my surprise what glorious music these components produced!!! Oh how I was finally moved. Beautiful imagery and staging. The components just seemed to disappear leaving me with music. In my small listening room, everything sounded good. Silky smooth and so easy on the ears. Several friends who moved from two channel into the home theatre world were astonished at my latest "house sound". Maybe my mindset was different this time; older and wiser? Possibly I was more relaxed and less fussy? Or, maybe this time I didn't listen with my wallet?! Whatever the case, I found my own slice of Nirvana.

HOWEVER, there were occasions when the wife and kids left me alone to my vices, with the opportunity to really "crank the volume knob". Here I thought the Harbeths might like a little more power...more headroom. Not that the CJ was ever clipping...perhaps the tubes were just borrowing from Peter to pay Paul, when asked to work their magic at full tilt with these speakers?!?

Enter Jeff Rowland Design Group. I have ALWAYS had a thing for the JRDG gear!!!! From my perspective, Rowland is a hands-on mad man always pushing the envelope with newer technologies and unusual circuit designs. Doing it a bit different as it were - right, wrong, or indifferent - his way. Show the guts of a Rowland to an Electrical Engineer, and the head scratching begins! All this with a beautiful packing job to boot! Years ago, I auditioned the Rowland Model 2, 75 watt stereo amp with Synergy preamp at a local hi-fi store. I was blown away and had a hard time believing that some tubes weren't being slipped in, some place. I remember that audition being very lively and punchy without annoying. In short, I never forgot it.

Enter the Model 6 monoblocks. Once the decision had been made for more power, I had my amp choices narrowed down to the CJ Premier 12 (140 watt monoblock version of my Premier 11A) or something from JRDG. Deep down, I felt it was time to roll with one of the "better" solid state amps...go for a total change as it were. Remembering my audition with the 75 watt Model 2, the Model 6 with it's 150 watts seemed like just the dish for me. The units I bought from Jmcgrogan2 had the black face plates, which was an added bonus; I felt that the all black would be less "bling bling" than the signature Rowland silver, and less likely to influence anyone that happened to be over for a listening session. The black blends in much better, and is more subtle. However, once you inspect them up close, you quickly realize that you're looking at something special. Black aluminum tanks!

Enter Model 6 sound. For some reason I was expecting more harshness, maybe some grain. Even though I was previously impressed with the Model 2, I just couldn't let go of this notion that solid state was the devil's work and would annoy me with shrill sounds. OH HOW WRONG, I WAS!!! All of that tube-lover smoothness is there. The best imagery I've EVER heard....and this is something my CJ excels at! There are times when I close my eyes and feel like I'm not even listening to a "stereo"!! It's all there only with much greater authority! Much more concert like. More stage like. This sound is very energetic and moving...and that tube like warmness that I'm so fond of is still there with just a touch more detail. And the louder it gets, the better!!!! I'm amazed at how much bass my Harbeths can deliver - these are not large speakers!!! But now I have this punchy bass slam that's accurate and controlled. And here's the clincher: at louder volumes, the Rowlands can present this deep bass without losing any of the mid range or upper registers. No more borrowing...no sacrificing one area to furnish another. They just keep delivering and reproducing what you throw at them until some other component breaks down...in my case it's probably my small room or the monitors! I never thought solid state amplification could give me the same hair raising experiences as my beloved tubes. Time to quickly step off the audio merry-go-round, yet again, and enjoy what I have.

Thanks For Reading,
Jeff
sand_man
Speedy,

If I remember correctly you're using a GNC moddied ARC SP15 with your 8T. Did you have balanced outputs added to your SP15 or are you running it single ended into the 8t??

Thanks,

Scott
I just have to say how helpful Jmcgrogan2 and Raquel have been!!! I sincerely respect the advice I'm getting here!

It's true,this preamp situation is making me a bit desperate. My CJ PV10BL was/is an excellent match for my CJ Premier 11A, however, I can sense (hear) that the Rowland amps are begging for a more accurate, and better defined input. Something refined and more neutral. I need less of the CJ "house sound". To be cliché, this PV10BL is throwing a veil on some recordings.

I think I was satisfied on initial sessions with the PV10BL and Model 6s, because the amazing bass control had won me over. Now I can sense that the cymbals don't have the same rush or ring that I was once accustomed to.

I'm trying my best to be patient. Ideally, I want a Rowland Synergy 2i. However, the ones currently on A-gon, just don't fit my criteria (one is in Canada, one comes with the battery and is out of my price range, etc).

I thought about finding out how much it would be to have Rowland upgrade a Synergy 2 to the "i" version. Then I could pick up a Synergy 2 for a lot less.

I guess, I just have to wait.
SirSpeedy:

Does turning equipment on and off damage it? Over time, yes, some equipment more than others depending upon how hot equipment gets, as the hotter a piece gets when powered up, the more expansion and contraction occurs when it is turned off and cools down (it is expansion and contraction that causes components to fail over time). Leaving equipment on 24/7 does subject the caps to additional wear, as a cap is smacked around by alternating current waveforms (hence the term "A/C") whenever power flows to it, but good caps last many years even when seeing power 24/7 and are easy and relatively cheap to replace. The other parts of a component are not necessarily easy or cheap to replace, however, and the best way to protect them is to keep them at a constant temperature. People think that solid-state amps are easier to own and more "reliable" than tube amps -- wrong -- ask Krell and Madrigal amp owners that question after they lose transistors and then discover that the transistor is no longer made. In this regard, the riskiest component to buy used is probably a solid-state power amp -- most people turn them on and off, and after a number of years of being "pulled in and out of the fire", so to speak, some internal components have literally become brittle (a tube amp, on the other hand, essentially becomes a "new" component when it is retubed). Ask any honest tech who works on these things (the dishonest ones will say "turn it off", as it helps keep them busy). Manufacturers will tell you the same off the record, but often say "turn it off" in owners manuals because of liability concerns. Others want you to have best sound and most reliability, and do not include an on/off switch at all -- when the component is plugged in, it's on. Some components have to be turned off or can be more safely turned off. For example, tube amps must be turned off because output tubes pass a lot of current and last longer if powered down when not in use. Class A-biased solid-state amps burn a ton of electricity and heat up a room when left on constantly, as well as go out of bias too quickly. A component using small-signal tubes (preamps, DAC's, etc.) can be turned on and off if it also uses tube rectification, as the tubes in the power supply bring voltage up to the other tubes very gently, but most tube gear uses solid-state rectification, which is the biggest reason why people are constantly, and unnecessarily, replacing small-signal tubes (at power-up, the voltage applied to the tubes is like a kick to the groin).

All of that said, if you feel that you have to unplug your equipment to protect it against electrical storms, then you have to unplug your equipment -- suddenly running a few hundred thousand volts through your equipment is an extreme example of the deleterious effects of thermal cycles.
I am under the impression that the Rowlands are always powered up whenever they are plugged in... esssentially in a 'sleep' mode until the front switch is activated. I know that my model 8 works in this manner and I am fairly sure all of the line does the same.
Are we suggesting that these amps be left on full power up all the time?