My D-225 is also "sealed" but not my Pre-1.5 preamp. I believe in addition to being stripped the screws are also epoxied. Trust me, I've tried to open this thing and its not going to happen. Instead I just sit back and enjoy it now.
Mine has been problem free. Some tidbits I've been able to collect: The power supply is way overbuilt. The transformers are designed by Paul and he has them wound to his own specs as well. Computer grade capacitors are generally used. Paul uses his own choke filter design. The switches are typically Shallco 45 step attenuators with Roederstein resistors and the input selectors are usually Shallco as welll. However, I heard at one time Paul was designing his own so its possible that these are the ones used now. Instead of a typical on/off switch a high quality breaker switch is used. Internal wiring is solid core copper. Not sure about the amp, but on my preamp the internal ground wire to the IEC is not connected. I suspect this is true of the amp as well as it appears to be something consistent in Paul's designs/mods. Cardas binding posts usually my preamp uses Cardas RCA.
Paul has never been a fan of negative feedback so this is a NFB design. While listed at 225 watts (not sure if its RMS or per channel, I think the latter) its closer to 300 watts. My chassis is black and made from steel, but I think some may be the newer aluminum ones (I had custom rosewood side panels made for mine). The dual volume control knobs are usually wood (mine are purple heart) and over sized and the dual input selector knobs brass.
Other than that it just sounds real good. I'm using mine right now with a pair of Audiokinesis Stormbringer speakers after having used it with Spendor 1/2e speakers for the last couple of years.
Mine has been problem free. Some tidbits I've been able to collect: The power supply is way overbuilt. The transformers are designed by Paul and he has them wound to his own specs as well. Computer grade capacitors are generally used. Paul uses his own choke filter design. The switches are typically Shallco 45 step attenuators with Roederstein resistors and the input selectors are usually Shallco as welll. However, I heard at one time Paul was designing his own so its possible that these are the ones used now. Instead of a typical on/off switch a high quality breaker switch is used. Internal wiring is solid core copper. Not sure about the amp, but on my preamp the internal ground wire to the IEC is not connected. I suspect this is true of the amp as well as it appears to be something consistent in Paul's designs/mods. Cardas binding posts usually my preamp uses Cardas RCA.
Paul has never been a fan of negative feedback so this is a NFB design. While listed at 225 watts (not sure if its RMS or per channel, I think the latter) its closer to 300 watts. My chassis is black and made from steel, but I think some may be the newer aluminum ones (I had custom rosewood side panels made for mine). The dual volume control knobs are usually wood (mine are purple heart) and over sized and the dual input selector knobs brass.
Other than that it just sounds real good. I'm using mine right now with a pair of Audiokinesis Stormbringer speakers after having used it with Spendor 1/2e speakers for the last couple of years.