Integrated Amp Bargains with good balanced sound?


I could not find any info in archives, so I am starting this thread.
I am using Rega P3, Sonus Faber Concertino spkrs. ,but my amp is junk. 15 years old small Yamaha (part of a bookshelf system).
I don't have a big budget ,so i am mostly looking for Ebay bargains.
Someone out there must know what are the GREAT BAragain Integrated Amps I could find in under $500.00/600.00 category?
Something not vintage but a few years old.
I appreciate everyone's advice.
128x128dkzzzz
Go4Vinyl I read horrible professional review of Denon PMA2000
It was recognized as great amp with dual mono design, but the reviewer stated that if "one is looking for Phono stage, you might just forget about this Denon" It is throw away built-in phono stage built on components shared by a range of Japanese manufacturers.
So that review eliminated Denon for me, unless I can use it with separate Phono-Stage. The question is what input on Denon to go through from the Phono?
Hi Dkzzzz:

The outboard phono stage would go through any other aux line input on your amplifier. The input is no different than the one used by a tape deck or cd player.

Regards,

Rich
I looked at a few (20) AMPs and I stil have questions:

1. Should I care about power outlets integrated in a back panel of the Amp? I like the idea of cleaner current.

2. Should I stay with speaker cable clipping or should I switch to banana clips or RCA plugs? Most Amps don't have clips on the back panel but rather RCA jacks (don't like RCA)
I lean towards staying with clips what you say? Any good reasons?

Thank you much.
1. No, you shouldn't worry about the power outlets. They're sometimes a convenience but shouldn't be a factor in your decision.
2. Most of the amps that have been recommended will have speaker 'binding posts,' not spring clips. You'll find spring clips on less inexpensive gear and they don't provide a very secure connection or much contact area. Binding posts generally offer the possibility of using anywhere from two to five connection methods, including bare wire, banana plugs, spade connectors and pins. Any of those are an acceptable way to connect the speaker wire as long as the fit is good.

RCA connectors aren't used for speaker connections on amps like this. The RCA connectors you see on the back of the amp are inputs for sources like a CD player or tuner.

If you click here and look at the picture of the back of the Onkyo A9555 I recommended you can see the RCA inputs at the lower left and the binding posts for two pair of speakers near the center. Those particular binding posts work best with either bare wire or banana plugs (by prying out the little plastic protective caps in the ends of the posts.)
Thank you for your answers. You do not think conditioned power supply form the Amp's transformer would benefit the sound?
Not trying to argue. I am just new to the whole Audio analog hobby.
Aside from simple convenience is there significant benefit in having power coming from the Amp rather than from the wall outlet?

Onkyo cost/feature is really attractive, but my Audio store in Boston does not stock Denon Onkyo Yamaha brands is it because they don't want to compete with Large electronic chain stores?