Room Correction Hardware options ?

Mr N- The "stock" unit comes any way you order it. Are you planning on bi-amping your system? If not- the 2.2 is not what you want(it's designed two drive two woofer channels, as well as the main channels). Whether the 2.2 or 2.0: They can be configured any way you choose. The 2.0 only needs one DAC and one ADC to function fully analog through its inputs and outputs(fully balanced or single ended). If you were to purchase one used and it wasn't fully analog: The converters could be plugged in by you, or Boz could quickly do the install. It's as straightforward as plugging an audio driver board into your PC tower.

Mr N- I missed your question concerning interfacing a TacT with an integrated amp. The tact units(either 2.2 or 2.0) are pre-amps/control units/room correction devices and you'd need no other device between your analog line level source(phono pre, CDP, RTR tape, etc.) and your power amp(s). Of course you could also input the digital output of your CD transport directly into the excellent circuitry of the TacT unit and let it oversample and reconstruct your music signal. If you own an integrated amp already: If it has a pre out/main in loop, you would simply bypass the pre-amp section altogether and feed the output of the Tact into the main amp.

Rodman,

tks for the reply.
I have no plans to bi-amp my system.
My source is a cd player Esoteric sacd/cd player. I'm not so sure whether the 2.2 can read sacd ? Maybe i would need a analogue to digital converter.

If to use integrated amp, and if integrated amp is not digital type, how do i connect tact into amp tape loops ? is this were a card adc would come into play ?
Also with tact, can you manually boost and reduce a certain frequency much like using a graphic equalizer /

Tks again for help

Noli

Mr N- Since you are not interested in bi-amping, you don't need the 2.2. The 2.0 or 2.0S (http://www.tactlab.com/Products/RCS20/index.html)are what you should be looking at and they can be equipped with analog ins and outs also. These TacTs have a parametric EQ that allows you to choose what frequencies you want to affect(up to twelve freqs, left and right independent of one another), the level of boost/cut(+/-12db), and "Q" or octave bandwidth that the filter affects.

Rodman,

Tks for the help.
i've looked at the rcs 2.0 and they have a model with analog in s and out.

TACT 2.0S AA Core + AD + DA converter: This is the complete digital preamplifier suitable to replace the preamplifier in existing systems. The modular design gives almost unlimited potential for upgrades. 5 digital inputs, 4 stereo analog inputs, 3 digital outputs, 2 stereo analog outputs, balanced and RCA.

In effect with the parametric eq it should solve most room anomalies ?
You mention about 12 frequencies, which frequencies are they ?

Regards

Noli