Tube preamp noise

Thanks,
I may contact VTS later. The preamp is 4~5 years old and uses 4 6SN7s. It came with 4 sets of 6SN7 GT, and 2 GTAs and 2 GTBs. All tubes generated microphone tapping sound on tapping with the eraser end of a pencil. Small bumping sound appear to be OK but I found two GTAs are much worse than others. The GTA and GTB sets generate much worse cracking (or whatever) noise than 4 GTs. Among 4 GTs, one seems to generate more noise.

Furthermore, among 4 sockets, one socket always generates more tapping noise regardless whatever combination of tubes used.

I mixed (those seemingly good) 3 GTs and 1 GTB, and the tapping noise got reduced a little bit, but now there is more hum noise. Is it OK to mix GT and GTA/GTB?

I guess for many tube amp owners such problems are not uncommon, and hope my preamp is not defective other than tube problems.

Furthermore, among 4 sockets, one socket always generates more tapping noise regardless whatever combination of tubes used.

This might also indicate that a tube socket needs to be replaced.

Socket replacement? It is an easy job?
How often a socket can go bad? Is it a common problem for tube amp/preamp?

Thanks much for your help.

"You might buy some new production 6SN7 tubes...like Shuguang...and install those. The new tubes should not be microphonic, especially if they are purchased from a dealer that screens for this problem."

I got Shuguang 6SN7, and yes, I found they do not suffer from the microphonic problem. From new fresh out of the box, they do not sound as good as Sylavania or GE, but at least I am glad to find out the problem wss due to old/bad tubes, not to the sockets or other parts of the preamp.
Thanks!