Dynaudio C2 with Plinius 9200

"11-08-08: Dkzzzz
I don't think it is a power issue. If it was I would be complaining about lack of bass not the excess of it."

Lack of power = uncontrolled, loose, dull, muffled, slow bass = excess of bass.

Wow, i didn't expect such a stir.
Thanks everyone for you input, it has been entertaining as well as very informative.
Unfortunately where i live in Western Australia it's very difficult to get the opportunity to audition a variety of equipment and there's not a great deal of good secondhand gear out there so all advice is good advice.
Can i ask one more question of anybody still reading this post. The Plinius SA-103 is only 125 Watts into 8 with 50 Amps peak, although this is a class A amp why is it going to be a step up from the 9200 with 200 Watts and 40 Amps. Is the extra 10 Amps of more benefit than the Watts and why?

separates usually perform better than integrated amps.
this is where the upgrade in sonics would come from, by switching to separates. but in case of speakers that like power, the overall improvement would be questionable at best, since you will be switching to a lower powered amp. I would start with 200w/ch into 8ohms for these speakers.

yep..again bigger is better on the confidnce line

Ok, Dkzzz I realize now you are right and the rest of the world is apparently wrong.

Dyn's s--- despite the considerable evidence to the contrary. And they do not have any treble. Why would anybody pollute their systems with such Danish garbage?

Lord knows why people drop such large amounts of hard earned cash on them so easily.

Do you offer market tips as well?