Audio Research Ref. 210 questions


just got these today and was wondering about a couple things. Has anyone tried power cables other than stock? I was told by the seller that the stock cables were the best. The cables don't look like anything special to me ;) I was also wondering about footers etc.. Do any make a difference with these amps? I have them on the Adona Nemesis amps stands. Any replacement fan options - I find the too loud... How about the 6n1p tubes - anyone replace them?? Thanks for any and all info.
128x128mantis007
thanks for the reply. The amps were preowned and have been thur the first set of tubes. The current tubes have about 40 hrs so I guess they will need more time too..?
What speakers and pre-amp are you using these with? I would agree with Guidocorona's response.

Mantis007 you just sold your Cary CAD-211 AE's right, what sonic differences are you noticing being apparent right from the get go.

I have interest in the 210's also but I've been on the fence for a year now mainly because I just can't get over the noisy fans. I have heard these in a dealer's situation I can clearly hear the fans and if placed in my set-up I sit aprox 10ft away I would hear them clearly. What bothered me the most when listening to them was that on quiet passages or in between songs I could heard them which is distracting me.
hi Dev, I'm using a BAT VK52-SE pre and Usher BE-20 speakers. I did sell the 211's but had a totally different system at the time. The fans are real easy to replace and I plan on doing that. I have the covers off for now and the fans disconnected. The fan noise bothered me too - it only took about 5 min. and I disconnected them. The amps don't seem to run very hot either - not any more than the Lamm M1.2's I just sold. I'm really curious about power cables because they have made a huge difference with all of the previous amps I've owned. I may just get a 20-15 amp adapter and try my current Ridge Street Audio Alethias Cu PC's.
Mantis007, I was communicating with someone who has the 210's and uses Elrod power cords and said the difference was very positive.

Why did you sell the Lamm's and Cary's?

The Cary amps you had, what would you say the difference is between these and the ARC 210's and also Lamm. You have had some great amps in you system.

Thanks for the info. regarding the fans in the 210's, sounds easy enough and would resolve that problem.
Hi Dev, thanks for the pc info. As far as your question: I sold the Cary's because I bought some Innersound Kaya electrostats. I called Cary and they said not to use the 211's with the Kaya's. The Kaya's have a wicked dip to .9 ohm with a 75 degree phase angle. Not good for the 211's. I decided not to try it ;) SO, I got the Lamms because they are very good with a difficult load(Kaya). I sold the Kaya's and got the Ushers. The Ushers sounded VERY good with the Lamms but I wanted a bit more power and missed the sound of a pure tube amp. I'm still getting used to the 210's. I didn't really like them at first - their presentation is much more laid back and a bit distant compared to the M1.2's. I had to move my listening chair up about 1'closer to the speakers - things sound much better now. I do think the Lamms had better control over the Ushers bass. I can't really compare how the 211's sounded because I only used them with the Vandersteen 5A's I sold. The 211's are very nice amps, especially with upgraded tubes ;)