2. amps-preamps
  3. 1237070605

No output on New LS26

I just hooked it up for the first time and have tried both outputs and CD and Proc Pass Thru and get no response from volume. Re hooked main amp back up to pre-pro and it works fine. Hooked up Grado headphone amp up to outputs and nothing. Hooked Grado up to Monitor and get bleed thru so a signal is present. Hooked grado up to record out and get full sound. The culprit appears to be the volume switch. Spent an hour on the phone with the dealer, we racked our brains. Life sometimes has a simple solution that you just don't see it. OH also tried reset procedure 4 times. SO any one have an idea before I box it back up. Hoping is just a tad of magic dust, mixed with sap of oak tree and a frog eye. Let me know what you think.
128x128theo
newbee
4,775 posts
 
FWIW, in your evaluative process - The signal you get from the 'record out' doesn't pass thru the pre-amp's line stage so you get full gain from the source when you take a signal from 'record out'. It signifys nothing about the source of your problem. The Proc Pass Thru is not independent of the pre-amp prower source - it is like any other source.

Dumb question time - did you check the fuse? You didn't mention whether or not you were getting an indication that power was getting in - do the lights come on?

To me it sounds like the pre-amp out put is simply muted by the mute circuit. Have you checked?

BTW, this is generic - I do not own a LS26 (got on old SP10).
mofimadness's avatar
mofimadness
5,003 posts
 
Ted,

Make sure that the "Processor" is OFF, the "Monitor" is off and the "Mute" is off. I can come over if you need any help. Just let me know.
theo's avatar
theo OP
2,694 posts
 
Thanks to bothe of you. I have double checked "mute" is off, tried both "monitor" on/off pos. "proc" selects like seperate input so when "cd" is selected, it reconnects inboard. I had to leave for an hour and 1/2 I think I will give it another 30-40min and see if has any capacitance drain from it's little brain. By the way I have re-booted per ARC instruct 4-5 times and no cookie.
I may have a dead soldier. Thanks so far.
Oh well at least I got my C5xe back from it's update so
that will get me through a Saturday nite, with my BLUE METERS! Brad! Ahem the Blue Meters are all aglow!!
mofimadness's avatar
mofimadness
5,003 posts
 
Also make sure that you have the tubes seated properly. If you have a bent pin that is missing the socket, the preamp won't come out of mute. Can you see if both tubes are lighting up? Maybe a bad tube? Did you get an extra set of tubes?
More to discover