2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
ddraudt's avatar
ddraudt
609 posts
 
Tbg, From reading and listening to Rick, the principals of the magnetic conduction and it's effect on the systems components. There is a claim that break in time on magnetic cables includes "magnetic saturation" of components. If true, (and I have no reason to doubt), Then break in
prior to shipping will have limited effect. I have used a cable cooker and had HF cables played for weeks in other systems but still had to wait to hear the best sound. As we know, cables can be sensitive to movement,
so there is some break in time ofter moving cables. however, the break in time ofter moving is so long I don't think it is just moving cables.
I believe different folks with different systems will have varied experiences.
I'm loving the music!!
Hope you are too.
DD
ddraudt's avatar
ddraudt
609 posts
 
Calloway, I enjoyed that 6 Moons article- thanks for mentioning.
The author explains the effects of HF cables well.
The article mentioned an old adage ,"Don't listen to them if you can't afford them". Sounds funny but true of audio auditions.
I didn't think I could afford HF cables until I heard their unbelievable
transformation of my sound. How much is it worth to be in an undiscovered realm of magical sound?
At this point, I have more money in High Fidelity cable products then the rest of my system. I am thrilled by the newly discovered major upgrade to Reference Quality Sound and adjust my system to improve it further.
Happy Listening
DD
calloway
874 posts
 
Ddraudt...i emailed Joel at '6 Moons' and thanked him for the great review.he mentioned that the HF cables were not necessarily for everyone due to their cost.but the review, and others like his , of cables and other audio gear that are relatively expensive, are important. on the used market these cables can be affordable as owners upgrade to higher levels.what is too expensive at ~ $2000 may be affordable at $1000 and give someone the HF experience that we, HF owners, know to be amazing.
tbg
5,263 posts
 
Ddraudt, I agree with your logic about the breakin of the HF cables. Perhaps there are two breakin relationships with one being the breakin of the cables and the other is their influence on the components. I can make no judgment of which would take longer. I do know that after they have stabilized, a slight movement of them sets them back for perhaps an hour. I also know that initially they sound better for about two hours and then deteriorate from which they come back even better and that this period is longer with the better series, such as the Ultimates and Ultimate References.

Calloway, there is always the question of affordability, but in reality these are very inventive cables. It is quite clear in my discussions with Rick Schultz that each of the four series of these cables all represent further improvements and performance, but I must say that my greatest shock came when I first hear the original CT-1s. As you say, one can work up in these cables and be satisfied with each level.
ddraudt's avatar
ddraudt
609 posts
 
Calloway, I hope to move up to UR series in time, selling my Ultimate
interconnects( 1M) and speaker cables ( about 9.5 feet).
At this point this is a future dream as I have new speakers being built
and hope to buy about 20 sets of Stillpoints. So, unless I receive an unexpected windfall, It would be 2015. By Then, who knows, I may be wanting some newer series of HF cables.
More to discover