2. amps-preamps
  3. 1252302265

Help choosing a Conrad Johnson preamp

Hey all,

I am looking to finish off my system with a Conrad Johnson pre. I have narrowed it down to either the Premier 3, Premier 10 (line only), or Evolution 20 (exact match for my Evolution 2000, except extremely hard to find one for sale). Does anyone have any advice for me? My system is below:

Amplifiers: Conrad Johnson EV-2000, Conrad Johnson MV75A1, B&K ST-202
DAC: Musical Fidelity X-DAC V8 receiving USB signal
Power: Balanced Power Technologies Upgraded CPC
Speakers: Energy Veritas 2.4 floorstanding loudspeakers

Lastly, am I good keeping the X-DAC, or would it be worth it to find a CJ DA-2B tube DAC and connect via toslink for an all CJ setup?
solst1ce
bobheinatz
722 posts
 
Phaelon,

I did not say best of the line but I feel best buy or best value. The 16LS2 is to my ears is a better preamp but at used prices I feel the CT6 is a better value. The CT 6 never got alot of press but quite a good preamp. I have listened to all the CJ preamps in the past 5 - 7 years and their house sound did change to a more neutral sound but one I like. The 17LS is also a very good preamp. YMMV.
breuninger
101 posts
 
I've owed three Premier 10s-they are very dimensional and smooth but not as tuby sounding as the Premier 3. If you are seeking holographic imaging and can forego slap-the-face taut bass you will be very happy. The highs are airy and realistic. It's one of my top five classic preamps.
Far exceeds the SP-11.

Peter
phaelon
1,052 posts
 
Breuninger, I apologize for misquoting you - quite sloppy of me. Thank you for answering my question.
solst1ce OP
3 posts
 
Thank you for your replies. The only downside with the Premier 10 is that it only has one pair of outputs. I know there is a similar topic about this but I thought I would ask anyway. If I have two active subwoofers that I can connect mono (one run to each), am I okay splitting the signal at the Premier 10 with y-adapters at each terminal, with one pair going to the amplifier, and each from the other pair going to the [powered] subwoofers? Will this result in a signal quality loss?

Sam
systembuilder's avatar
systembuilder
111 posts
 
Hi this is a bit late to add this but for reference CJ will install a new set of main outs for I believe $140 or so if I remember right, it was pretty reasonable
More to discover