Passive Preamps


I'm curious about passive preamps. Has anyone tried a passive preamp in their system?
mdeblanc
Post removed 
One more point I would like to add is that in case of TVC the amp's input sensitivity is VERY important. With a TVC, the input sensitivity of a power amp better be below 1.5V.

Why is this? Is it because of the TVC volt-to-current conversion from the source? ie an amp with lower input sensitivity means it's easier to drive to full output power? apologize for the laymans terms. What would a 1.5v or higher amp input sensitivity equate to sonically?
Tholt,
no need to apologize. I was not aware of the significance of these measurements till I asked these same questions to a GURU on this forum. He has explained in detail about the TVC and the attenuation it does to the incoming volts. Send me a PM and I can send you the explanation he gave me.
I am hamstrung by 'honor' not to mention comments by several well known designers with whom I've had this discussion. Passive, versus...
In fairness the one's who gave long dissertations, (over a few friendly glasses of adult beveridges) invariably also designed Active preamps to mate with their amplifiers.
It's funny, at the CES over the past 27 years you meet the most interesting people. Virtually all claim to have the consumer or the 'best sound' at the root of thier recommendations--or we could even ammend that to be 'most accurate' or least colored.
For all of us who actually listen, we know that, for a group interested in making the smallest 'change' possible, we seem to have a rather diverse opinion of what 'change' really is....
No one, especially me, doubts the veracity of the comments of the designers, yet I think that one quick story (and there are witnesses) about a conversation in a bar in Munich three years ago.
While discussing designing, I asked a collegue this question as clearly as possible. "During design, what point do you begin to evaluate the sonic differences in the parts, (caps, etc)?
The designer looked at me with a straight face and said, "I don't". "If I've done my job correctly I don't need to listen."
(Enter Steve Martin) "Well excuuussee meeeeee!"
Me personally, I can't imagine not making a 'sonic evaluation' along the way, during a design. Without giving a 3000 word diatribe here, let's just say that cap "X" by reputation sounds 'soft' or laid back, and cap "Y" a little brighter, and we have several of those combinations in the design. MOST designers, if not all, that I've spoken with, make SOME allowance or listening moment during this process to insure that, either 'good or evil' has been created.
This designer stood his ground.
He left shortly thereafter, and I was alone with the other 10 or 12 people, and couldn't help but ask, "Do any of you feel this way?" "Do you design without listening to the 'parts' along the way?"
The verdict that night was unanimous. "Everyone listens to the interim design."
That, could explain why everyone but the one designer is right and everyone else is wrong, or, of course, visa versa.
Now, as to the principle question, Passive versus, active.
Out of (by memory 7 designers of note) not one single designer preferred passive. Again, they all made an active, therefore had reason to prefer it. However, from a business standpoint, they had the option to make the best passive they could design, versus the best active, and all chose to build the active.
You decide.

I vote active, EVERY TIME...perfect, no, better, to my ears, yes.

Good Listening,
Larry