2. amps-preamps
  3. 1260293112

how to include the subwoofer?

I have power amps (Kharma MP150s) that only have balanced inputs.

I have a preamp (Nagra PL-L) that only has selectable outputs (balanced or single ended), and only one set of balanced outputs. It does have a pair of unblanced.

I have speakers (Wilson Benesch Curve) that go down to about 35 Hz.

I have a subwoofer (Velodyne DD12) that I would like to use to round out the bottom octave and help with some room nodes.

What is the best compromise:

> to use the pair of unbalanced outputs on the preamp and use RCA-->XLR adapters at the amp end, and regular RCA cables to the subwoofer;

> to use XLR y-cables out of the preamp balanced outputs

> use an electronic crossover that has both balanced inputs and both balanced and unbalanced inputs (expensive solution, but offers added capability of not running the speakers full range).

None of these seem very good to me. Any other thoughts? As always your insights are most apprecited
dgaylin
martykl
3,578 posts
 
BTW,

I'm pretty sure that the NHT X-2 is available direct (oand IIRC from AudioAdvisor.com for a few bucks less) with a money back guarantee for a home trial period. There's little at risk if you're tempted to check it out.

Marty
daviddakine
9 posts
 
XLR Y-splitter out of the preamp.

Run the speakers full-range, they sound great right?

Tuck the sub underneath, less is more.

Clean and simple solution, takes advantage of what you already have.
martykl
3,578 posts
 
Dgaylin,

FYI - someone has just listed a used Museatex active/passive switchable high pass filter for sale at $275. I haven't heard this model first hand, but I knew a guy some years back (generally reliable) who swore by it. Just FYI.

Marty
dgaylin OP
255 posts
 
David, Marty, thanks for the additional replies. Your two posts bracket my thinking. So....I'm gonna try both and see which works better. Hey, it's a hobby afterall.

thanks guys.

--dan
More to discover