SS bias pot tweaks?

I should mention that having said all that, I would definitely not attempt this procedure on an amp with multiple pots on each channel.

Be careful - my amp is in the shop because I very stupidly shorted something out when I was measuring the bias voltage.

Mark

I have a Audoninics cc3 and one channel is warmer then the other . I checked the dc offset and the cooler side was 18mv and warmer side was 3mv so i was told to get them as close to 0 as possible. They are now set at just about 0.to 1.0.
Now i do have bias pots ,but where do I take the measurements from and what should be?

Thanks