Well, this investigation has taken a turn for the worse. I decided to remove the Synergistic RCA's from te amp and turn the ground switch to 'normal'. After i turned my equipment back on from the cable change, i lost sound out of the left chennel. I've tried every scenario to see if it wasn't my source, preamp, speakers or different cables. I've deduced that my amp blew a channel. The 4 buss fuses inside, although taped uo to hide the filament, seemed to still work because the 2 blue lights on te front panel were lit up, the 'Hi Temp' light was off, and te right channel worked.
This is a total bummer and now i have contacted Parasound to see what my options are.
Thanks to everyone for all your input.
Mlenn, are you going to leave both IC's sets connected? didn't know that it would have a similar result for others or not.
This is a total bummer and now i have contacted Parasound to see what my options are.
Thanks to everyone for all your input.
Mlenn, are you going to leave both IC's sets connected? didn't know that it would have a similar result for others or not.