2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
tbg
5,263 posts
 
Audiolabyrinth, thanks.
theaudiotweak
2,797 posts
 
Brass sheet material cut into small pieces laid on edge between the carpet and cables works wonders. It is a balancing act of sorts but once elevated stays in place. The material and minimalist contact area between the threads and the cable are the benefit at work. Same could be achieved with brass bent and joined at right angles to form a T to rest on a hard floor material placed between the flat surface and the cable. Tom
tbg
5,263 posts
 
Theaudiotweak, I think this is the opposite of my experience as you are using conductive materials, while I'm using non-conductive materials.
theaudiotweak
2,797 posts
 
Basically using a non ferrous knife edge for minimum contact area.
tbg
5,263 posts
 
Theaudiotweak, but my experience is that even most dielectrics aren't any good. Static electric charge is probably the culprit.
More to discover