What tubes for sibilant SET Triode amp

I didn't realize that you are Switzerland based.

Add Philips Miniwatt 6dj8 to the list as they should be fairly common on your Ebay.

I'd also like to note that using Siemens 6922 types in my old Audion (300B/5687/6922) amp caused sibilance, therefore my experience differs from that of Ralph @ Atmaspere.

80's Mullard CV4024's (used as drivers) make my current 2A3 SET amps sound like a cheap transistor radio. Telefunken 12at7's make them sound too bright.

Thanks for the couple of great hints. Gallo sides I checked all connections; these seem fine. The Cayin do not seem to be phase inverting as they collaborate well with the Gallo subamp also hooked up to the Ref 3.1. In fact I get +/- 3dB all the way down to 25 Hz with a small dip around 60-80Hz of -6dB. No possibility of adjusting treble on my speakers though.

It looks as if the input tube should be the place to start tube rolling. Likewise I will experiment with replacing the Nordost Red Dawn speaker cable that I currently use by something slightly less forward.

Sorry - just got the itch that there could be just that little stretch to be covered to achieve perfection (knowing that I never get there anyway....)

I found the Telefunkens to be the smoothest yet still detailed 6DJ8 variant around