2. amps-preamps
  3. 1298754541

Moving From AVR to Amp

Relative newbie here so please excuse my lack of knowledge. I am assembling a system for HT and music (70/30 respectively). My room is 29x12, viewing/listening position is about 8-10 feet from the front speakers. I started a couple of years ago with Totem Forests, Model 1 center and Lynks rears, Velo SPL-1500R sub. in a 5.1 set up. I have been using an Onkyo TX-SR805 and a Squeezebox just to start while I gradually build my system. I recently added a media center PC built by a friend, that I use mainly for streaming movies and as a blu-ray player. I am thinking of (1) adding a separate multichannel amp (either 5 or 7 channel) and using the AVR as a pre/pro for a while, (2) getting a good stand alone DVD/CD player now, and then adding separate components in the next year or two. I am budgeting roughly $3,000-$4,000 (including interconnects) in this phase of the upgrade. Used but well cared for equipment is fine with me to maximize the value of my system. My questions, before I go listening/shopping: Is this a reasonable way to upgrade? Would I be better off selling the AVR and starting from scratch? What amps should I consider? Is it better to get a 5 channel amp for now and add a separate amp if I go to a 7.1 set up later? Sorry for the long post, but there seems to be alot of info to sort through and I am trying to learn.
theclam
meiwan
399 posts
 
Well, your Onkyo is clearly the weak link - both as a pre-amp and as an amp. I'd be inclined to drop the Onkyo and look for a decent pre/pro + power amp. Maybe a gently used Anthem, Classe, Cary or similar.

Just adding a power amp to the Onkyo will help drive the Totems properly, but won't likely improve the overall sound quality a great deal.

As far as getting a good stand alone DVD/CD player, I don't think such a thing exists - that will play Blueray. If you are really into good CD sound, look for a decent CD only player and either keep what you've got for blueray, or get a cheap blue ray player as well.

For 5 vs. 7 channel, except for the odd blue ray disc I doubt having more than 5 channels is worth it. Personally 5 channels is plenty for me. Of course, if you are set on it, go for the 7 channel - it's likely a lot cheaper than adding another 2 channel amp later + power cord etc.

Just my pov
macdadtexas
1,794 posts
 
I second the moving from AVR to seperates, dump the Onkyo.

I would look to buying a very good pre HDMI pre-pro and let your video be switched at the TV level, if that's possible. Have the BluRay player decode the surround modes from movies, and send the sound via analog cables to the pre-pro.

For the disc player, don't do it. I would buy a good Oppo BluRay player for discs and seperate DAC.

for your $4000 budget hear's what I would do:

Parasound C2 ($1000) pre pro

Parsound 2205 AT ($750) Amp (great amp, will work well with your Totems)

Oppo BDP-93 ($499) plays everything

MHDT Havana DAC ($899) great tube DAC, hard to find used

Sonos ($369) download all your discs and run the music on here to the DAC, use a good digital interconnect.

all interconnects from Signal Cable for multichannel, and find some used Kimber Hero or Cardas for about $110 a pair to run from the DAC to the pre pro.

well, that's my $0.02
ethos
35 posts
 
You have a great start with the Totems. If you're mostly interested in HT, then moving to a multichannel amp and pre/pro at this stage makes sense. If you're generally happy with your HT set up now, though, you might consider adding a nice 2-channel amp (keeping your AVR as the preamp). I'd bet that your Totems would begin to open up and sing on 2-channel material with just that change alone. You could then reassess and decide whether you want to add in a 3-channel amp for your rear and center speakers. There are a lot of great options for high quality, $800-1500 2-channel amps. Many folks here on AudiogoN use 2-channel pre-amps with home theater pass through options. You may want to look into that if you haven't considered.

e
More to discover