2. amps-preamps
  3. 1300324847

Budget receiver/integrated amp for Cornwall III's?

I'm not able to set up my CW-III's in our new home so I've had them up for sale (locally), but have had little interest. Therefore, I'm thinking about putting together a two channel rig is a spare bedroom that is sort of my man cave.

I'm on a very limited budget since I'm not sure how long I will keep this set-up and my plan is still to sale the speakers and downsize at some point.

I'm looking for an integrated amp or receiver that would be a good match for the Klipsch and $400 is going to be at the top of my budget. I know this is not much to work with, but I wont need allot of power. My room is ~ 12 x 16' and I'm looking to buy used.

I've got a three channel amp (too big), center speaker, etc. I'm also trying to sale and if something moves soon then I may be able to go a bit higher.

What do you think guys, is it possible to get good sound at this price? BTW, I still have many good IC's and speaker cables and will be using a Sony SACD/DVDP for my source. ES model, that's not half bad.
jack_dotson
elevick
2,638 posts
 
You are going to need to borrow one if you can to see if 10-20 watts is good for you. It was more than enough on my Cornwalls. $400 is a tight budget but for $500 there's a ton of choices for an integrated tube.
I do have a 7 watt Monacor for about $200 if you are interested.
Keep in mind that many of the low budget vintage pieces have issues due to age (humming, buzzing and noisy controls). Be prepared to have work done if you buy an inexpensive piece.
You other option is to start with a $100 Marantz solid state until your budget frees up a little more?
br3098
997 posts
 
$400 for a decent tube integrated is going to be tough. For that price (or less) I would suggest that you look at some great low-powered vintage SS units. The Marantz receivers, mentioned above, are a great choice. I love classic Sansui gear as well. But I think that the best choice might be a clean used (pre-Alpine era) Luxman receiver or (better) integrated amp. Look for a clean L405, L-450 or L-480. All should be available for well under $250.

If you are determined to buy a tube unit, I would look for a Dynaco SCA-35 or maybe an Eico ST-40. Nice units, but they often need work (cap upgrades at a minimum) and can be a bit noisy. If you get really lucky you might run across a Scott 222 or 299 series in your budget.
jack_dotson OP
210 posts
 
Well guys, the CW III's are gone. However, I picked up a set of vintage DCM TF-400's (more appropriate for a bedroom system) and am looking for a receiver for those.

Different animals from my Klipsch, but the price was right. :0)

Thanks for your help and advise. I appreciate it.
ths364
181 posts
 
I've got the DCM TF-600, and they have great synergy with
the Harman Kardon 330c , and also the Pioneer sx-770 receivers.The Luxman r-103 is truly amazing with these speakers.
More to discover