Want to replace the Photeniometer with the right one of these http://www.partsconnexion.com/conrtols_attenuator_khozmo.html who can help me? Which one do I need to buy? Thanks for any help
Sorry the DMM is a digital multi-meter. If you don't have one and don't know how to check resistance,skip that suggestion.
The schematic for your preamp which I found on the web shows a standard stereo pot. "potentiometer" 6 pins. One ground, one input and one output per channel.
Take a look at it. It should have a sticker on it somewhere that says 50k or 100k. Those are the most common values anyway. Or if your going to have the work done for you have them check it for you. If it is indeed 50k and you have the physical room for that stepped attenuator it will work and be a nice improvement.
If you're 'rather clueless' and do not own a DMM, I am not sure you should be performing these mods yourself...you could do your amp, or worse, yourself, quite a bit of damage. Just sayin'... byron
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
