2. amps-preamps
  3. 1307494572

Rougue Audio Perseus up against McIntosh C2200

Got my Perseus today, and been listening to Vinyl all afternoon. Got to say the Perseus kick the crap out the C2200, at least in the phono stage. More open, better imaging, I don't know but it seems better. Selling the C2200 on Audiogon soon plus a MC352 replaced by a Will Vincent ST70 with new Gold Lion KT66 tube. I listened to both pre amps today with the same system and the Rogue sounds better to me at least in the vinyl. Did listen to two CD's and could better, not sure. Did not listen And I just saved a $1000.

System
Acoustic Solid, Machine Small
Will Vincent Dynaco ST70
McIntosh MVP 871
McIntosh MR78 Tuner
Zu Audio Definition MK II
Zu cabling, interconnects and power cables
Preferred Pre Amp Rogue Audio Perseus
cstripeika
Ag insider logo xs@2x
jgiacalo
446 posts
 
I've owned the Rogue 99 Magnum and now own the C2200 and found that the 2200 really came alive by tube rolling the stock tubes out and replaced with upgraded NOS tubes and aftermarket tubes for both the line stage and phono preamp section. Preferable to the Rogue.
The stock c2200 tubes really aren't very good.
cstripeika OP
7 posts
 
Wow, Thanks I still have the c2200 what were the tube improvements, Specifically what did you replace. The Rogue is cool but lacks something compared to the C2200 with regard to the CD player. I would like to try some tube rolling.
knghifi
1,668 posts
 
From my experience, I agree with Jgiacalo the stock C2200 cheapo Chinese tubes are junk. Settled with Tele ribbed plates and CANNOT believe it's the same preamp.
cstripeika OP
7 posts
 
I agree, I am going to change the stock tubes of the C2200. Do some tube rolling and add a pair of Bob Latino M120 mono blocks (kit amps)as as seperate system (with Gold Lion KT88). The speakers, Zu Def MKII's have three terminal blocks each and can run three differing amp setups, indididually, of course. 60 Watts with my Zu Def MkII could entertain the neighborhood. Of course, good taste would be required.
cstripeika OP
7 posts
 
I do notice that there are no phono adjustments on the C2200 where the Rogue does (resistance, capacitance, gain). My guess is the C2200 has it setup for a mm with a resistance set at 47k. I changed my Rogue to 300 Ohms and set it for a mc. That made a difference. I am also Tube rolling the Rogue with Vintage NOS Mullards. Also changing rca cables from Copper to Silver alloy.
More to discover