2. amps-preamps
  3. 1324687968

Problem with my Atma-Sphere M60

Hope someone can help me out on this. My amp is 6 months old and one of the monoblocks stopped working. The amp has three fuses at the back. One of the three appears to be blown (its the third fuse closest to the right edge of the amp as you look at the back of the amp). I can really make out what kind of fuse it is. I think it says 5A 230V, but not sure if it is the slow or fast blow kind. Anyone have an idea? Could I find this at the local electronics store (Best Buy or Fry's)?
dracule1
roscoeiii's avatar
roscoeiii
1,155 posts
 
I posted a longer rant about the inadvisability of asking questions like this. But it hasn't posted for some reason. Short version:

Lapierre is incorrect. For all models of M-60 the fuses are slow blow fuses, as the manuals I linked to make perfectly clear.

For questions like this, call/e-mail the manufacturer/retailer or go the manufacturer's webpage. Not a good thing to ask in a forum due to potentially disastrous incorrect information that might be given.
dracule1 OP
1,085 posts
 
Roscoeii, don't worry. I know they're slow blow fuses. I figured out I need 3 amp fuse, not the 0.5 amp. I just looked at the fuses in the other working mono block to confirm which fuse I need. There are no 5 amp fuses on the M60.
tpreaves's avatar
tpreaves
2,687 posts
 
I just looked at the fuses in the other working mono block to confirm which fuse I need.

There you go, one problem solved. The bigger problem I see is,why did the fuse blow on a six month old amp.
lapierre
547 posts
 
My bag Dracule. I figured you would just look at the other fuses to determine what you needed.

HiFi Tuning manufactures fuses SLOW and FAST. At first glance I only saw FAST 5A fuse which is what I posted.

Hopefully you get better fuses.
dracule1 OP
1,085 posts
 
Thanks for your responses. Lapierre, Ralph told me it was most likely tube arcing that blew the fuse. Now, I have to check all the tubes in that mono block. Not fun.
More to discover