2. amps-preamps
  3. 1330108669

Bass tones and low cost tubes for a Jolida 502B

Hi everybody.

I asked in another thread looking for advice with the Jolida tubes but I decided open a new topic focus on it.

I have the Jolida 502B with Paradigm Monitor 11 speakers, with Xindaq DAC and reader, waiting to upgrade this periferials.

I really like to hear jazz as Joshua Reed, Herbie Hancock, Spyro Gyra, Chick Corea, Yellow Jackets... rock as Everything But The Girl, Depeche Mode, even Metalica or Rammstein... and electronic DJ"S as Armin Van Buuren, Oakenfold, Chicane, Enigma...

At this moment I have a Electro Harmonix salad in the Jolida, last owner legacy.

The sound that I have is very "shinny" or in excess sharp...with a feel of "we need a subwoffer", despite the Paradigme Monitor 11 and the 502B punch. I'm conscious about some room reflection yet but I can't improve it more...family matters :)

In my country Costa Rica, a $45 individual tube will cost around $110 with the custom taxes and shipping costs. So I have to be low profile about it.

I REALLY APPRECCIATE YOUR ADVICE ABOUT IT! I know is difficult but a good tube is a good tube and a poor brand too.

Reading the reviews on tube depot and tubestore on this tubes:

AX7
large plate AX7's ?? I read that this get more medium bass and tight bass presence:

- BLACK SABLE Sovtek 12AX7LPS
- SOVTEK 12AX7LPS Preamp Vacuum Tube
- JJ ECC803s / Hi-Performance 12AX7 / tubedepot.com

- Mullard 12AX7 / ECC83 / thetubestore.com
""Microphonics is not an issue despite the larger that average plate structure. The transconductance on my sample was the same as two NOS samples I measured. Not really high gain at all, but a real good noise floor and a nice smooth tone that doesn’t encourage ear fatigue the way some preamps can be."

_________________________________________
AT7's:

- 12AT7 / ECC81 Mullard / tubedepot.com

or

- Mullard 12AT7WA / CV4024 / thetubestore.com
"The NOS Mullard 12AT7WA / CV4024 tube is low noise and long lasting. This 12AT7 tube is a very good choice for hifi preamps, driver stages, and guitar amp reverb circuits. The Mullard 12AT7 is original production from Great Britain."
_________________________________________
For the KT88;s

- Sovtek 6550WE / tubedepot.com
"The Sovtek 6550WE has higher gain / output than most others and really has a ballsy sound. Recommended for any bass application and most Hi-Fi amps. This tube has a slight bump in the midrange making it a great choice for lead guitar."

- Sovtek KT88 / thetubestore.com
""The Sovtek KT88 tube has smooth, warm and clear with excellent imaging. The bass (except for the very bottom end) is tight and the high end is crystal clear. The separation of parts and balance is better than any of the 6550 tube types."

- JJ KT88 / thetubestore.com
"The JJ KT88 tube has the best imaging of all the tubes in this category. The bass is unique in that it compresses the very bottom end. This provides incredible bass response without ever losing control. Overall a great KT88 tube for orchestral, opera, and jazz music."
edoll
newbee
4,767 posts
 
In my Cayin amp I use the Sovtek KT88 and the JJ 803 with excellent results. I find both as described in the tubestore description. I've used the Sovteks for many years and have found them very reliable. The JJ's are new to me.

If you want a fuller bass and something a bit more forward in the (upper)mid range the new production Tong Sols are quite good as well.

Can't help you on the AT's.

FWIW I think you might find the Sovtek 12ax7's clean and clear in tone but not particulariy warm. The JJ KT88 is supposed to sound good but may have QC issues. I'm not partial to any of the EH tubes, except for their 6CG7's, in general. I've tried. :-)

Hope that helps a bit.
edoll OP
12 posts
 
Thanks Cayin!! I read before that Sovtek's has pretty good construction and has a very good reliability.

Tonight I installed a quad match of KT88's EH that I received at final 2009 . Turn on the Jolida and plum! One of the left channel got blowed?

I'm in Costa Rica, I don't know if some transportation issue happened.

So, I'm back with the original 65550's EH....

So, I'm waiting for a little bit more of advice to put my order @tubedepot or tubestore, the only store's that I have some reference in USA.

Thanks buddy.
edoll OP
12 posts
 
jaja...sorry! Thanks Newbee!! LOL!
More to discover