EL34 upgrade


I'm currently experimenting with my Jolida JD302B and various tubes. I have 3 makes and each are vastly different from each. In terms of preference I would order them as such: (1) Svetlana, (2) Sovtek, (3) Shuguang. They are all the budget versions. I am considering upgrading to either the SED Winged C or Gold Lion Reissue. So my question, is whether I would expect improvements to the preferred Svetlana? I have a pricepoint of $200 for a matched quad and not sure whether I need to go higher to really hear a difference. Also I'm sure I'm sure there are others, so please weigh them in as well.

-JerseyWalt
qclabrat_1
you guys beat me to the next, I'm going to open another forum to ask about the preamp stage tubes

As there quite a few EL34 users here, are most EL34s created equally in terms of life? What's the typical life in hours for the EL34s, as I'd like to know how many extras to buy should I find the perfect match.

Also, do new tubes have a burn in time, before they are optimized, like interconnects?

-JerseyWalt
Ok, for whatever reason I decided to just ask Jolida. They suggest EL34, 6CA7, or KT77. You can actually switch out some resistors to use KT88's if you want (I wouldn't want to, but some might). I didn't find out about the KT-66, but more than likely there's enough play in the biasing to work with those too.
I'm using J&J EL34L's. I can't pretend to know if they're the best out there, but they were a big improvement over the stock chinese tubes in my amp. better extension and clarity. They're also relatively inexpensive at about $13-14 each.
NOS Tesla's can be easy found from USD 50-80 each, fair if you ask me, but if you look around you may get them cheaper.

Agree about input and driving section, its always an combination of tubes, not output only.
I liked the GL KT77 the best of the small number of tubes I tried in my Jolida...JJ 34, EH6CA7, Svetlana 34(stock tube).

However you need to specify high biasing tubes with the GL 77's...the first set I received didn't come up to bias @ maximum travel of the trimpots.
And I would also suggest slightly under-biasing them.

I hear good things about the GL 66's, but have yet to try them.

YMWV