How long daes it take your gear to warm up?

I think the longer my SS amps stay on the better they sound...so over 4 hours is good. Hard to say about the cdp and the tubed pre amp. I don't want to leave that tubed pre amp too long since those early 60's NOS tubes are expensive.
I have a friend that tried leaving his big Levinson amps on all the time until he got his power bill..then he stopped that practice.

Sounds very good at the start when cold, just a touch thin and a slightly compressed soundstage. Sounds excellent after about 45 minutes running music at low volume, and then a slight improvement over the next hour or so. I leave all my solid state gear off when not in use. I would feel uneasy leaving it on unattended for long periods.

30-45 minutes for me...a combination of tubes(pre and amp) and a SS amp on the bass in a biamp configuration.
I usually power up and let it sit for 5-10 minutes before un-muting the pre.
It really 'shines' after 90 minutes.

In general I find tube gear sounds best after 1-2 hours. SS gear I leave on 24/7 unless it is a Class A power amp. Though I do admit that when I run track 7 on the Ayre/Cardas burn in disc, the rig sounds pretty damn good within 20-30 minutes.

Peter_s, I've also heard that cycling any piece on and off is best for capacitors. Many modifiers recommend cycling on/off so that caps break in quicker. It seems like this keeps capacitors "in shape", it's a good work out for caps. However, powering on and off does have negative affects on other electrical components, as switches, relays, resistors, etc are exposed to in rush currents. Since the component seems to sound better being left on 24/7 and the electrical components are split on the positives and negatives, I leave all SS on all the time unless it is a Class A power amp like my current CODA Model 11 amp.

I agree with Jim. Takes about 1-2 hrs for tubes. SS about 24 plus.