2. amps-preamps
  3. 1337095667

$$$Sensitive Speakers with $$Amps?

I've read a recent thread, and a Six Moons review for recommending certain amps who's price tag falls short of the subject loudspeakers. For example, Red Wine Audio 15 with Rethm Maarga speakers.

My area of focus is with sensitive speakers being driven by low-watt amps. Are there really super values out there for these type of amplifiers, or do the typical spending rules apply?
kennythekey
kennythekey OP
593 posts
 
When considering an amplifier, I would require at least three inputs.
charles1dad's avatar
charles1dad
10,250 posts
 
Hi Kenny,
I believe you`re moving in the right direction and there`ll be no looking back. The Hornings and Rethms are both very good choices. I agree with other posts above in that a good 300b or 845 amplifier(is a used amplifier a consideration?) will certainly provide the sound you seek(life like realism not hifi) I understand the Krell system example you gave above(phony/sterile ultra black background rather than live sense of ambience and background presence). If you do go SS have you considered the First Watt amplifiers, particularly the new SIT version?
Regards,
kennythekey OP
593 posts
 
Hi Charles,

I am welcoming suggestions and thank you for yours. I will keep the First Watt on the back burner.

Single drivers and simple circuits seem to go hand-in-hand. There are only a handful of different ways to design simple amplifier circuits. One can complicate the design by adding tricks to make their's unique, but that's getting away from the purity of sound IMO.

This tells me that great sounding low-watt amplifiers can be built inexpensively and this has already been revealed. Other things that I've come to believe, for example, is that point-to-point wiring is ultimately superior to circuit board wiring. Again, this is my opinion. However, good looks and other features drive up the costs for boutique designs. I don't want an ugly duckling, but a compromise seems reasonable.

I like to challenge what I've become comfortable with. When I get my speakers of choice, I will use my current Sam Kim amp to see how it does for noise and SQ. Sam can also build me a low-watt design, but a 300b or 845 may not be Sam's choice. This is why I'm seeking everyone's help, so I have more viable options and can narrow down my listening when I'm ready to get serious.
atmasphere's avatar
atmasphere
12,104 posts
 
Our amps only have one stage of gain. Hard to get simpler than that. In general its been my impression that cost is less important than the simple fact that some amps sound more like music than others. So my answer is now 'depends' as there are expensive amps that do deliver.
charles1dad's avatar
charles1dad
10,250 posts
 
Kenny with the Horning you`re lucky in that you have many choices available. OTL, DHT tubes as SET or PP design,low power SS(in class A) etc. Just with 300b amps alone there`re so many good choices for less than silly money.Many Horning owners seem to do quite well with 8-10 watts of power. Of course the transformer and power supply can vary significantly at the same power rating.Based on what your priorities are it seems a DHT(2A3,300b, 845 etc)either as SET or PP will give you what you want.OTL is a different sound and certainly has it supporters also.

It would be ideal if you could compare some SET and OTL amplifiers with your speaker of choice and simply hear for yourself.I`m confident you`ll find exactly what you want with some research and patience, I sure did.
Regards,
More to discover