Boulder 1060 amp and upmarket p.cords and filters?


I recently bought Boulder 1060 and thinking replacing the stock cord plus feeding it from filter.
Any ideas and experiences?
128x128mert
Nice Rhyno,

Congrats. I have heard this amp...effortlessness is the most amazing thing to hear when heard done well. I first heard it from the Wilson X1/Grand Slamms, and i have now heard it with a couple of amps...yours included.

I expect to hear the new D'Agostino Momentums next week at the premier of the Wilson Alexandria XLFs in Europe.

Will post. Meanwhile, enjoy your incredible system!!!!!!!!!!!
Mert, I also own a Boulder 1060. I would recommend connecting it directly to the wall (as I do) unless you have what I consider to be the only power filters which actually work & sound good with a powerful amp like the 1060, they being the Isotek Titan Evo 3 or Evo 3 Genesis. The 1060 is already well filtered from noise and vibration, so it is fairly inert to standard wall warts. In regard to power cords, you can order a German Walther 32a connector directly from Boulder as a part to re-terminate one of your cables & put your factory cord in the cupboard. The Walther connector is capable of handling large gauge cables without a problem. The opening is 2.5 cm in diameter and the strain relief can be trimmed to handle any cable size. I had one of my Acoustic Revive Power Ref cords re-terminated with a Walther with excellent results. The Acoustic Revive Power Reference is an excellent value pc & according to my Dealer sounds better than Nordost Valhalla. Ultimately though, I'll upgrade all my cables to Siltech Royal Sig series which are superb (and warm sounding) which the Boulder 1000 series needs. Hope that helps.
Cheers,
MG
Rhyno
I opened 32 connector and checked what could be done. Actualy, I was gonna replace the stock Carol by Tunami, accidently, I cut my finger due removing a powercon from old Tunami cable. 80 percent of upmarket cords are all compatible with 32A.
regards
Melbguy
Thanks for input. I have isotek nova for front end gear and I know titan will work for big amps. I think I will go for PAD corvus since I have a few PAD in circulation.
Regards
Mert,

pls post your findings...looking forward to reading about your thoughts on PAD. I quite like your choice, and own mainly PAD Dominus and Ann Contego. good luck.