Art Audio Carissa Signature 845 or 300 b amp?


I just tuned up my Jadis with the help of Trelja and Mechans. It sound great. In fact I prefer it over my 845 amp which I fell in love with.

A short time ago,I visited a friend to listen to his 300b system. It sounded extremely good.

My question is for anyone who has experience with the sound of the Art Audio or any other top shelf 845 amp and a good value, used 300b amp in the $4000 range?

My question is vague, but it will help mein making up my mind on what to do with my systems next.
mattzack2
A P.S. to my previous post. Keep in mind also that many SET amps will not do well into a 4 ohm load, even apart from power capability/speaker efficiency considerations. The Franks, for instance, appear to only provide 8 ohm and 16 ohm output taps (Charles, correct me if I'm wrong).

My push-pull-parallel VAC Renaissance 70/70 MkIII, btw, has taps designated as "4 to 8 ohms," "2 to 4 ohms," and "1 to 2 ohms"!

Regards,
-- Al
90 db is okay, 4 ohms "could" be okay. Depends on how much (and where) the impedance flucuates to come up with the 4 ohm "average". The flatter the better.
Almarg makes a very good point.Mattzack2, as much as I admire my SET amplifier it`s not the 'ideal' choice for your Dali speaker. Al is right the Frankenstein does`nt have a 4 ohm transformer tap(8 and 16 ohms).The Frankenstein has an exceptionally stout power supply and premium over speced transformers. It`s asking a lot for this amp to drivr that speaker load and expect the best from the amp(or speaker) under these circumstances.

I agreed that the VAC REN amps are better suited for this Dali speaker and IMO would sound wonderful.As I mention in an earlier post amplifier-speaker matching is the key factor. To be clear I`ve driven 4 ohm speakers with my amp and it was a very good sound.I just believe the 300b push-pull VAC would handle lower loads even better yet(particularly with the lower sensitivity).

Mattzack2 if your speaker were more sensitive and had a higher ohms load I`d strongly recommend the Coincident Frankenstein without hesitation. For example my speaker is 94 db and has a 14 ohm load. the amplifier has complete control of this speaker and it just sings.
Regards,
Charles,
Agree with those who stated that 300B SET is for efficient speakers, not for the Dali. But I would not get a 300B push-pull amp. Use the Jadis, or acquire efficient speakers that will mate well with a 300B SET.
Get a push-pull canary 300B amp.
It has 4 ohm taps. I have had (and still have) the Canary CA339 and at one time also owned the VAC Ren 30/30 MkIII.
The Canary was decidedly a better amp and, thus, the keeper, with my Joseph Audio Rm25si MkII speakers.