Is soundstage just a distortion?

I'm from the camp who's position is 'been there, done that' regarding original music production. Not much if any new stuff is worth while anyway. There's so much original vinyl out there I haven't heard that I'd need at least two more lifetimes to sample it all.

Commenting on Learsfool's most recent post -- multi-miking classical recordings is not necessitated by the use of digital recording devices. There are no technical reasons why a 2 or 3 track, a la 1950s Decca/Mercury/RCA, digital recording cannot be made. The reasons for miking each orchestra section and/or soloist are artistic, practical and ultimately economic. Multi-miked, multi-channel digital recordings give the audio engineer/conductor/record producer/record label far greater control and make it easier to sculpt the final sound of a recording than purist recording techniques can. Effectively, classical recordings have adopted the pop music paradigm of record production which doesn't place an emphasis on "realism". It's not about the capture of an event, instead it's more about the creation of one.

I have one old Mercury Perfect Presence lp where the liner notes and graphics provide exact detail on performer's locations on stage during recording, the goal for the recording being to reproduce that, and for the listener to have a clear reference for how well the mission was accomplished. Very cool! That makes that particular lp very special and useful as a reference recording for soundstage and imaging.

Some recordings with huge untampered-with soundstage include Dave Mason Live, Paul McCartney Live, Clash Live, Lou Reed Rock and Roll Animal, New Jersey Percussion All-Stars on Nonesuch label, and Jazz at the Pawnshop.

I’m not sure whether we’re not talking about it because it is obvious or because there’s some being obtuse afoot, but maybe worth retreating to first principles for a moment to try and find a common vocabulary about what “soundstage” is an how it happens.

As I understand it, you have to start with basic psycho acoustics. You’ve got two ears, one on each side of your head, at about a head’s breadth apart. This gives us stereoscopic hearing – which is basically the ability to triangulate distance and direction of the source of sounds based on the micro-second time differentiations between when the sound waves hit one ear and then the other. Two receptor points (ears) permits triangulation of the third (origin). Simple.

In its purest and simplest form, stereo recording does exactly the same thing. Two mics, set up about the same distance apart as your average pair of ears, records two channels of what – in theory – would be exactly the same two channels worth of acoustic queuing you’d hear with your ears were they in the same spot as the microphones. Thus, these two channels worth of information should be able to recreate the same ability to triangulate source and distance of sounds. Soundstage, at its purest and most abstract.

From there, this pure abstraction pretty much goes to hell. For a lot of reasons. Even assuming a perfect time and phase correct recording, the mission-critical micro-second queuing differences between the two channels are pretty small. There’s a whole lot of ways they can get messed up, just from reading them off of whatever medium is at hand, processing them, amplifying them, subjecting them to the whims of multiple power sources and AC lines, shooting them through all manner of wires, and ultimately off to a pair of speakers, which have to turn these electrical signals back into a physical process by vibrating just so in order to excite sounds waves. Good luck with that. But from there, things really go wonky, because these same sound waves – emanating from whatever vibrating bit, or typically several distinct bits, which may or may not really get along, is/are getting its/their shake on – then are loose in the room and have to find their way to your ears. They bounce off of stuff, stuff can get in the way, the room can resonate at weird frequencies, they can bounce into each other and either cancel each other out or get excited in strange and inappropriate ways, in short, they can get into all manner of trouble. Only then, if everything goes as planned and they get to your ears still carrying the same micro-second encoding as first recorded (again, assuming it was recorded in the first place) then you get to “hear” this intended soundstage. It’s a wonder it ever happens at all.

All of this, in turn, assumes a relatively simply miced, straightforward stereo recording of, we’ll call it, unamplified source noise. That, more often than not, is not a correct assumption. Multi-channel recordings, including separately processed, altered or even wholly-created electronic channels have no “original” soundstage to preserve. None. Rather, they present the building blocks for the sound engineer to create whatever soundstage they see fit. Maybe he’s looking at a multi-track recording of a symphony and wants to try to recreate a sense of the original soundstage through the mix. But, even assuming that’s the goal, it’s still using the captured channels to create an approximation, and then down-mixing into the two channels of a stereo recording. Fundamentally, what we might describe as the “soundstage” is frequently an arbitrary fabrication born out of the decisions of the recording engineer. (Which then have to make the odyssey back from the recorded medium, through the chain, to your ears. Again, good luck.)

Anyway, you get the idea. “Soundstage” is, in some regards, stupefyingly mysterious. But in others, it’s really pretty straightforward. There are all manner of things that can effect, mess with, or otherwise screw it up. But they are, by and large, knowable things. As for one medium of recording being inherently better than another at preserving/conveying/reproducing/etc this information – in theory, that makes no sense to me. In practice, who the hell knows? In any event, that's my theory and I'm sticking to it (unless and until I change my mind).