Oh the Montanas, yes I know a few that have them. One set-up isn't so bad and he's had them for years with ARC gear. I couldn't tell you the model number. Certainly not my cup of tea for most music but he is primarily a rocker listens to quite a bit of jazz and some classical, it works for him just fine. I heard a pair of the big KAS many years back at a dealers. He just loved them, their dynamic capability you know. I just didn't get it and couldn't wait for it to end and besides the things were so big they reminded me of two large coffins. Another guy whose large Montana system I only heard once in his huge listening room was all tweaked out with thick slabs of maple under all components, all the cabling with risers keeping them from touching the ground. To me all the tweaking did was highlight all the issues I had with his system. We listened to a lot of old rock and roll that night including Ted Nugent, the Stones etc. and I throughly enjoyed it. But THEN we put on one of my favorite piano recordings of Earl "Fatha" Hines and immediately realized I never knew a piano could sound like that, very interesting. We talked later and I told him how much I enjoyed the evening, which I really did it was a lot of fun listening to rock and roll with the guys. My only regret is I wished I had brought some of my favorite rock recordings. I mentioned I didn't realize he was such a rock fan. He said he wasn't really but was more into light jazz and female vocalists. Now that was a tough one to figure out. Those big Montana's sure could boogie but for female vocals and jazz? As I always say, to each his own. Audiophiles are a real diverse lot but one thing most are not lacking is passion and opinion. I personally find most multi-driver system problematic with a few exceptions. The coherence is generally blown and you end up listening to a speaker instead of music. The older I get the more apparent it becomes.
Now back to the DeCapos. I think the only thing left for me to do is find the right cables. I may have found them after that last session. They don't cost an arm and a leg and they just sound right when used together. The problem is they look like a bad joke, something Rube Goldberg threw together in an afternoon with the ground wires separate from the helix solid cores wrapped something that seems like mylar. The ICs are app. half inch strips of very thin copper wrapped in the mylar type material with unruly ground wires outside the mylar with VERY minimalist connectors that attached to the components rather loosely, not snug like you would expect. The power cords have round plugs that look like they were procured from an electric supply house that went out of business 80 years ago. Remember the old toastmaster toaster with the cloth cord with the wire wrapped in asbestos inside? Well those plugs would be on the end of that cord. I really haven't seen anything like that for years. The power strip looks like the economy model at Wal-mart wired the same as the power cords sitting on a beautiful 6" slab of solid maple. I would hope that it is at least 12 guage, fires you know. I guess I've given it away now. Totally minimilist Tubeers, no fancy leather or solid dovetailed wood cases with thick felt lining with the brand name printed on fancy silk. In any case, before going that route I am going to reconfigure my system, build a new wood equipment rack so if I do decide on these cables, they can't be seen. Besides, too much clutter in the room, its time for a makeover and my wife agrees.
Now back to the DeCapos. I think the only thing left for me to do is find the right cables. I may have found them after that last session. They don't cost an arm and a leg and they just sound right when used together. The problem is they look like a bad joke, something Rube Goldberg threw together in an afternoon with the ground wires separate from the helix solid cores wrapped something that seems like mylar. The ICs are app. half inch strips of very thin copper wrapped in the mylar type material with unruly ground wires outside the mylar with VERY minimalist connectors that attached to the components rather loosely, not snug like you would expect. The power cords have round plugs that look like they were procured from an electric supply house that went out of business 80 years ago. Remember the old toastmaster toaster with the cloth cord with the wire wrapped in asbestos inside? Well those plugs would be on the end of that cord. I really haven't seen anything like that for years. The power strip looks like the economy model at Wal-mart wired the same as the power cords sitting on a beautiful 6" slab of solid maple. I would hope that it is at least 12 guage, fires you know. I guess I've given it away now. Totally minimilist Tubeers, no fancy leather or solid dovetailed wood cases with thick felt lining with the brand name printed on fancy silk. In any case, before going that route I am going to reconfigure my system, build a new wood equipment rack so if I do decide on these cables, they can't be seen. Besides, too much clutter in the room, its time for a makeover and my wife agrees.