Oppo BDP-95


I am a bit nervous. I am going to hook up my new BDP-95 directly to a pair of new Bel Canto Ref1000M monoblocks using the BDP-95's XLR outputs. From what I have read using the XLR outputs (Set on variable) on the BDP-95 the sound is great when hooked up WITHOUT a preamplifier. What, if any, experience has any member had with bypassing the preamplifier with a BDP-95. Thanks
endokhan
Be careful to go into the Oppo menu and lower the gain when you switch to variable volume control BEFORE you connect it directly to your amps! I prefered my preamp volume control, but it is easy to try to see which you prefer. If your present preamp in not balanced, you will likely prefer using the direct XLR connection.
He's nervous because if you have the volume at 100 and neglect to set it lower before you hook it up, you're going to blow your speakers. In addition when you update the firmware the volume gets reset to 100. There is a ton on information over at avsforum. Lot's of people seem to be doing it. I prefer to use a preamp.
Sorry, I presumed that he had done a modicum of research before considering the move. I should have counseled on the use of the volume control prior to making the connection. My bad, mea culpa.

However, I see *so* many posts on Agon where someone will write "I am considering this piece of gear or that piece of gear, or this connection vs. that connection. Which do you think I'll prefer?" How are we supposed to know what someone will prefer?

It seems that timidity rules in AudiophileLand...

-RW-
I don't actually bypass a Cary Cinema 11a processor, but I do have its inputs set to bypass, so the BDP-95 does the processing. OTOH, I use the volume control of the Cary, and the Cary converts the unbalanced 7.1 inputs to balanced output to the amps. Stereo, of course, is passed through as balanced.

db