Why will no other turntable beat the EMT 927?


Having owned many good turntables in my audiophile life I am still wondering why not one of the modern designs of the last 20 years is able to beat the sound qualities of an EMT 927.
New designs may offer some advantages like multiple armboards, more than one motor or additional vibration measurements etc. but regarding the sound quality the EMT is unbeatable!
What is the real reason behind this as the machine is nearly 60 years old, including the pre-versions like the R-80?
thuchan
Mosin, Would you therefore dismiss any turntable with a light weight platter (and therefore a rather low moment of inertia) as a "contender", just on that basis alone? And if so, what is your cut-off point for "acceptable" inertia, in terms of platter mass? Or do you add in a factor based on intelligent use of friction, so the motor has a more constant opposing force, to partly mimic the effect of a very massive platter? (The 927 appears to have a "heavy" platter compared to that of other well loved idlers, but not in the league with some of the monster belt-drive platters I have seen, e.g., the Walker lead platter.)

There's them that just cannot ever be convinced about the possibilities of direct-drive, so hung up are they on a concept of the servo mechanism as a full-stop/full-go device that they cannot see past it. ANY turntable motor has to be able to respond instantaneously to the varying effects of stylus drag. Yes, lots of platter inertia helps but it cannot be the whole story.
Dear Rauliruegas, "Subject is that we must have measurements of the 927 as a reference independent of that: " I like it " + "Subject is that we must have measurements of the 927 as a reference independent of that: " I like it ", IMHO we have to know: what are we hearing with those today tipical measurements/facts?." +I asked to Dkarmeli. If we are saying that the 927 is the holy grail: where are those facts that could prove with out doubt is in reality the hoily grail?

The conversation isn't about me liking it or not, I'm just another audiophile, with access to one who can confirm what others have heard and known long before I came along. The EMT 927 is a PROVEN REFERENCE and the Holy Grail without my liking it. There's years of history and track record and not only from the audiophiles but from the best recording engineers, top recording labels and mastering labs, from people who had access to best master tapes and knew recordings with access to everything under the sun and did it for living. It was always THE industry standard and holy grail from day one to the last day that they were made and that's nothing to do with my opinion of it. It was, is and will always be unique. Thank you Mr. Franz!

- "I heard several times the 930 and other TT EMT models in systems that I know very well and other that was my first time with. I'm not impressed for it in a different way that hearing other top TTs."

EMT wasn't concerned with the audiophiles, they built industrial grade professional equipment of the highest order. The 930 had a very different set of design parameters to the 927 or high end consumer tables you're thinking of. It wasn't a mastering reference it was a dj table with market specific qualities and wasn't all about sound. It delivered what that market wanted 24/7 in spades, that's why they dominated that market until cheaper Japanese dd tables arrived. They did the same job for a fraction of the price, and again sound quality was't the main criteria. If you really want to know the 930 stick any of those top tt's in the same environment and then compare them. They use to stick the 930s in a van and drive around cobblestone streets playing music. Repairs in the field, swap out cartridges on the fly, and get abused by all kinds of users and still sound pretty good, which high end consumer tt you know of is capable of that? EMT engineers accomplished what they set out to do with everything they designed. They had very clear parameters that they adhered to.

- "Dkarmeli, posted examples of that " natural " sound and reality when we are seated in different places in a music hall but that IMHO we can't take in count because what comes in the LP grooves was recorded for microphones that was in a very different position that when we attend to a concerto. Those microphones are really near to the source and the direct sound is the one that prevail when at our seat position the reflected sound has a main influence in what we are hearing."

I used that analogy as an example of how different tables could all be right yet different at the same time. Its a matter of differing perspectives for the same reality and nothing specific to any recording or table. FYI what you hear on the finished LP is the mastering and production engineers perspective and not the microphones and their location.

- "About the Final TT I know an Agoner whom own it and I can tell you that maybe he does not agree with that: " too many gimmicks"

The principle behind the Parthenon 2025 was resonance control, they tried to do this with mixing copper and aluminum in the platter, the inverted bearing and the ridiculous ball bearing in the tonearm base and the wooden platform. Of course it was a high mass design common in Japan and was a pretty decent sounding table but compared to the Continuum which its design is also predicated on resonance control the Final is only a high school science project. And this is purely scientific fact and not anyone's subjective opinion.

- "Now, IMHO nothing in audio ( including the 927 ) is a rocket science that can't be duplicated. If, for example, I'm a TT designer ( that I'm not. ) that wants to put on the market the real ultimate TT I can asure you that I will analize every single today/vintage top TT not only to duplicate its performance but to improve over it. Maybe no one thinked that the 927 is the one to beat ( price no object. ). Could you think that in China, Japan, Korea, etc, etc can't be duplicated? I think this is not the subject."

The great stuff is a lot more than rocket science, its art of highest order and only the artist knows how to achieve what he created, you can't copy that if you're not on that level and the ones who are capable wont copy, they'll also create. Ask Mosin who's also and accomplished designer and creator, he can explain it better than I can.

-++++ " my subjective experience is the final determining factor for me. " ++++

What's strange about that? I know enough to know what I like. My most treasured cartridge is a 60s vintage SPU with a crooked cantilever that came mounted for free with a 301 that I bought off ebay for parts, imagine that.
08-18-13: Richardkrebs
I totally agree with your assessment of the SP10 MK3. However this is, IMO not a result of its design, the use of a servo, or DD. I believe it is the way it is built. The tension, greyness and lack of ebb and flow, can be significantly mitigated.
I dont agree with this comment. I hear a dissembling of musical flow and timing from the SP10's including the ones you have rebuilt.
If we compare direct drives on their own, the Kenwood L07D and SP10 sound quite different in terms of musical flow and timing. The SP10mk3 will measure better than the L07D because the L07D error correction servos only work when the speed error is quite large. The L07D relies on inertia to minimise tiny speed inaccuracies, whereas the SP10mk3 servos are much more aggressive.
The differences in the implementation of servos and their operating parameters are clearly discernible in the musical presentation of these 2 DD's which are quite different.
The Technics SP10's in particular dissemble the music, musical timing and expression becomes compartmentalised and lacks flow. Jean Nantais has expressed the same view, he prefers the softer servos as used in the Sony DD's to the SP10.
From my listening experiences neither of these DD's would compete with the top Micro Seiki's that I have heard in the areas of musical flow and coherence. The Gestalt of the music is lost with these DD's compared to a well implemented inertia driven system.
It may well be that if one has lived with Direct Drives with the intrinsic servo jitter for 30 years or so it is possible ones ear does not detect these issues the way that others do.
By the way, in response to your posts in the ET2 thread, I have now heard the full krebsupgrade and the SP10 in question sounds more woolly and ill defined than the earlier mule version of the exact same deck.

Tbg,
Tommy is right. Specific parts are not available without a 'donor' TT.
You may find This Thread amusing?

On the other hand.......new capacitors are all available....and Lewm has discovered that by Googling the transistor part Nos easily obtained from the Technical Manual on Vinyl Engine.......one can find replacements for all the transistors and ICs used in the TT-101 HERE

Life is too short to worry about the future.......?
My audio journey would be a lot poorer without the Victor TT-101 :-)
Dear Richardkrebs, thanks for sharing. Like the EMT 930 the SP10 were created with a different set of goals from the 927 by their designers. While you might tweak them you can't change their nature.