SUT advice

I use Dynavector SUP-200 with excellent result with Miyajima Zero mono but it is only 0.4 mV so the gain may be a bit much on BE mono. Don't know about Ortofon cartridge but I find the Dyna similar in tonal balance to Ortofon T-100 SUT except for better speed and pacing and just a tad leaner with more resolution.

Many thanks for all the comments/advise
Jmcgrogan2
How does the Ortofon Verto compare with its more expensive sibling, the 80 SE ? This is high on my short list and I did get to hear it, albeit too briefly with the Miyajima BE. It obviously should match well with the Silver Meister SPU.
Dan
We decided on a plywood plinth with a rosewood veneer. It's a slow moving project in the sense that the woodwork has yet to start.
Jjrenman
The 0.3mV of the Ortofon SPU is way too low for the Nagra to handle. Actually , the Garrard restoration is an opportunity to do the many vinyl things I have longed to : a 12" arm, mono playback and an old style SPU.
John
Ideally would like a single SUT that can handle a range from 0.3mV to 0.7mV without unplugging the leads at the Nagra end.
Suteetat
Would like to check out your Dyna recommendation but I don't think there is a local dealer. Maybe on my next trip to Singapore.
On current reckoning the Ortofon 80SE is the front runner.
Cheers
Pradeep

Hi my EAR MC4 has 4 taps I think it fits your description. Here's a good review btw ...and covers the various gain/loading options...

http://www.ultraaudio.com/index.php?option=com_content&view=article&id=197:ear-

It's worked very nicely for me...and my Lyra at .54 mv and the Allaerts at .2mv..

I am actually thinking of trying a different SUT...maybe one the Ypsilon's...no real reason other than experimentation...possibly the Allnic SUT also..

Curious what others come back with here...

Check out the Bob's Devices with the 1131 Cinemag's.

John
I have the MM card for the Nagra VPS on order. Do I need the dealer to install it ?