Help with outlet / powerstrip question

youll notice a big change just with the hubble,amp direct in the wall,digital seperate if possible.best way is deticated ac for both amp and digital,with individual circut breakers and grounds.imho.

For the best sound plug your amp direct in the wall. Your other components will benefit from "line conditioning" which you don't have. You can experiment with different components like DVD or processor if you have an extra outlet that you can by-pass the Panamax. It probably won't make that much difference. It could be worse if digital hash from these components back feeds through the amp.

In the ideal system you would have separate circuits for amp, analog and digital etc... You don't, so it's ok if you plug your UPS and panamax in the same duplex/quadplex.

Keep in mind, inexpensive gear can sometimes benifit more from line conditioning and isolation because they have cheap power supplies and regulation.

Unless you're a renter, you (and your system) will benefit substantially by having an electrician install dedicated lines. It's usually not as expensive as even a modest line conditioner. And unlike Steuspeed above, my line conditioners -- Tice Power Block III and PS Audio Power Plant (for front-end gear) --make a further audible sonic improvement compared to plugging them directly into the wall. The difference is easy to hear, in my system at least. Good luck, Dave.