Please help me eliminate my phono section hum

1.)Comes through my mid/tweet
2.)Cannot hear it when volume is all the way down
3.)Has always been present
4.)More like a "buzz"

It is continuous. No variation. I was able to attenuate it to some degree by using an Aural Thrills "active" RCA cable from the turntable out to the phono stage, so I suspect it is somehow turntable/arm/cartridge related??

thanks

Hi Denf.

The first thing I would check in this instance are the tubes in the phono pre. Try lightly tapping on each with a pencil and listen closely taking notes.

OR / AND

If the buzz is in one channel only, switch the tubes from right > left and hear if the buzz follows.

OR /AND

If buzz is coming out of both speakers, swap each one to locate the noisy tube.

Check back with your findings and all the best!!

Hy :D

Try eliminating all of the grounds, then hooking them up one at a time?

Thanks guys - and I will try your recommendation Dogpile. So far though, it seems like it might be the tonearm and/or RCA block at the table itself? Anyone ever heard of a buzz coming from defective tonearm wire??

I'll keep looking...

Denf, I've been having a similar problem and have yet to trace it. I have an Audioquest PT6 and it seems it's highly prone to this hum sound. I've noticed as I change the configuration of my equipment in the rack it can be better or worse, but it's still there. I also found most recently that if I conect a jumper wire connected to the ground post on the table and to the ground on one of the RCA connectors (any one) it helps to reduce the problem. My next step is to get a new tone arm cable (ie from the DIN connector on the arm, to the pre), and see if that solve it. After that I'll either try to hat new internal wiring in the arm, or just get a new arm. I've tried everthing else. I'm watching this thread carefully to see if anyone comes up with a simpler solution, as I posted a similar thread a while ago and there were no simple fixes provided.