Behringer DEQ2496: Ease of Use

Edaltford - good point. I run the Behringer fully open and attenuate with Endler attenuators down to regular levels.

If anyone can hear any less transparency using just the Behringer, not it's dac, I'd sure like to know how. I have a very resolving system and cannot hear any degradation whatsoever.

The point is that most people are not using it properly. If you cause digital clipping then you will hear degradation. That's why there's an adjustment. It depends on how much equalization you use to where you want to set the gain. As long as there's no clipping it's pretty impossible to hear this piece doing something wrong when it's being used entirely in the digital domain.

Warnerwh...Clipping would be obvious, from the Red LED flashing, and from the Peak reading saying "CLIP". Digital clipping can occur in the input A/D or the output D/A, but not in the digital processing which is implemented by a floating point device.

there's no clipping it's pretty impossible to hear this piece doing something wrong when it's being used entirely in the digital domain.

Not sure - it depends what you mean by wrong....I agree in the sense of "distortion", however an EQ introduces phase effects....often inaudible but they can be obtrusive at extreme settings...you can even get "ringing".

Furthermore an EQ does not fix an imbalance between reverberant sound fields and primary signal...like a band aid it reduces the OVERALL sound field. Some microphone analyzer systems and software can distinguish reverberant from direct sound fields (the decay)....something our ears/brain can do to a limited extent (early coherent reverberation is added to the primary sound - so it helps us hear some details that might be "masked" with out the reverb).

Ultimately it is a balance in primary and reflected sound that allows us to hear the most details.....this is what makes some auditoriums excellent and others terrible for listening, and the same can be said for an audio system in a room. The PEQ does nothing to help restore this balance even though it is a great tool.

The Behringer is only 300 dollars. For that money I feel it's an outstanding value. It can't fix alot of things and I only make adjustments of 3db max. When pushing up dips I only go up 2db.

This isn't the cure all but for the money is a bargain. Also it's worth having just for the education. You'll find out how different your system can sound from worse to far better.

The TACT is the way to go if you have the money, which I don't. I also don't think the performance for the money would outclass the Behringer 15 times over. The music in my room is very enjoyable and spending alot of money like the price of the TACT isn't worth it to me. However it's an outstanding device. I've never heard one but can imagine.

The most important part of a system though I believe now is the room. It should be the FIRST priority before setting up a system. It's hard to imagine the improvement without a reference. As Robert Harley says "The improvements are dramatic". I agree.

Also what