2. tech-talk
  3. 1208355744

Tube tester recommendations

Just getting into tubes what should I have? Thanks for your help.
samhar
samhar OP
1,048 posts
 
Thank you for your responses. I recently purchased an Aesthetix Calypso and Quicksilver V-4's to replace my Pass X2.5 and X150 that were mated with a Raysonic 168. My tube list has grown from 6922,6DJ8, to; 12FQ7, 12BH7 or 12FQ7, KT-88 and 12AX7WB !! I thought it might be prudent to learn how to test the tubes in my equipment and what I'm buying to better match them. I'm not ready for a $2500 tester yet but $300-$700 is ok. Is there one unit in this range that will test all the tubes I use for leakage,microphonics and...? I want to roll tubes and it is becoming evident that to achieve the sound I may want will require trial and more trial. My intention isn't to buy and sell( but to buy and buy) so possibly a cheaper tester to start . I got a taste of what can happen when I connected the 168( Amperex US White Label PQ) to the V-4 's(KT-88) I had to put the EH 6922's back in because the sound had become too mushy.
samhar OP
1,048 posts
 
I would like to amend my statement ( "I got a taste of what can happen when I connected the 168( Amperex US White Label PQ) to the V-4 's(KT-88) I had to put the EH 6922's back in because the sound had become too mushy".) The cause turned out to be the power cord to the Calypso plugged into a power conditioner!!
jafox
1,470 posts
 
If the Calypso's sound was mushy because it was plugged into a power conditioner (PLC), it is time to 86 that PLC. I have a friend that has several years experience with the Calypso, various tube-rolling efforts and power cords and power conditioners. He used the original Hydra PLC. When it was removed from the system, the clarity and dimensionality took a major nose dive. He has since moved onto the Running Springs Haley PLC which takes the system to a new level of dynamic contrasts. So your observation has nothing to do with the Calypso but rather the PLC you used.

As for tube rolling, it takes many years of trial and error with many tube types, brands, etc., in lots of various components, to get a feel for the contributions made by one tube or another. To simply swap out the stock tubes with a random set and think that is it ..... well, you've only just begun.

As for having to put back the EH 6922, if this is required, something is seriously wrong with your system. This tube has so many problems, I don't even know where to start!
rodman99999
6,206 posts
 
That Amplitrex unit actually tests at full voltage levels, which gives me much more confidence in a diagnostic than partial voltages. I like the digital mutual conductance readout too. The Hickok tube testers have always been highly regarded, and very accurate.
samhar OP
1,048 posts
 
Jafox I made a poor diagnosis of a problem thinking it was tubes and not the combination of power cord and PLC.I never thought or stated that it was the Calypso.I feel the Calypso is the the centerpiece that I am building my system around. The tubes I switched were in the Raysonic 168 which is the weakest (?) piece in this system,I meant to imply that the interaction of multiple tubes in multiple pieces of equipment presents a Pandora's House of posable combinations. I don"t consider this a random choice "Amperex 6922, PQ, white label, US (shield, gold pins) Another very good Amperex tube. Warm yet lively, focused, grainless and transparent. A winner one of the best. Dynamic with punchy bass to boot...." I consider it a good first pick.

Rodman99999 thanks for the imput
More to discover