How to eliminate FM RF coming thru turntable?


Mitchell GYRO SE turntable picking up FM RF after 5 PM to late at night. During the day, no FM RF being picked up by turntable. All other components, no RF (tuner, CD, tape). All components connected thru Furman power conditioner. Have run separate ground from Furman to turntable ground at preamp (Rogue 99) which reduces the FM RF considerably, but does not eliminate. FM interference reacts to volume control. FM RF disappears when turntable leads disconnected. Any suggestions?
128x128fossilsx15
Al -- my Grado cartridge is the Reference -- out put 4.0 -- length of the cables are approx. 24" -- they came with the Techno arm for the Michell Gyro Se -- again, I really appreciate your thoughts and suggestions regarding this --

Brian
I have a 4mv Reference Sonata, which simply says "insensitive to load capacitance," and I suspect the Reference is similar in that respect. Also, your phono cable is very short. Both of these factors suggest that you can feel free to add any reasonable amount of capacitance, perhaps up to a few hundred picofarads (pf), without affecting the sound at all.

But it may not be necessary to do that, if a good ground strap would have a similar effect to what you found when you touched the phono preamp. It looks like the best way of getting that, without having to purchase a large quantity from an industrial distributor, is via e-Bay. You can search there under "ground braid." Here is one good example:

http://cgi.ebay.com/20-Tinned-Copper-Braid-3-4-Flat-Wire-85A-Max-Ground_W0QQitemZ370134600553QQihZ024QQcategoryZ26213QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

If that doesn't do the trick, and you want to try adding capacitance, it looks like no one makes anymore the kind of kit I referred to, that I had many years ago, containing a set of capacitors installed on rca plugs. So you'd have to make your own.

Here is one example of a y-cable that you would need; there are many others, as you no doubt realize:

http://www.bhphotovideo.com/c/product/488449-REG/Phoenix_Gold_ARX_569_Silver_500_Series_RCA.html

The most convenient and inexpensive way of getting the rca plugs and capacitors would be, if you can stomach doing so, from Radio Shack. Their part number RSU 11537479 is a set of four gold-plated rca plugs. Part numbers 272-123 (100pf), 272-124 (220pf), and 272-125 (470pf) would be reasonable capacitor choices. Start with the 100pf, and if that doesn't do it go up from there.

You can also find suitable capacitors, with similar values, here:

http://www.tubesandmore.com/

Or if you want to wade through a vast selection of potentially higher quality parts, from an industrial distributor, go to http://www.digikey.com

You would have to be prepared to solder the capacitors to the rca plugs, of course.

But it might be simplest to start by trying the ground strap approach (using it either in place of or in parallel with the ground wires you've tried -- it shouldn't matter which), which could very conceivably solve the problem.

Regards,
-- Al
Thanks Al, will get on to your suggestions and see what happens -- might take a few days -- again, thanks for the input --
Al & Spencer -- wanted to thank you guys for the helpful information to eliminate the RF coming through my turntable -- the final solution: braided ground wires from my preamp & amp to the power conditioner's ground. So far, good listening --
Glad to have helped, and thanks for letting us know. This seems to be a not uncommon problem, and your info will be helpful to others.

Regards,
-- Al