Copper Sleeve over IEC


There has been several threads on AA about putting a 1 1/2" copper union (coupler) over the IEC on the CD Player, Preamp, Amp.

Well I tried it...

Anyone else give it a try?
128x128ozzy

I placed a piece of copper foil coupled with a brass weight over the first plug socket on my power strip. You can hear the noise level drop. This strip is for my digital source only.

There was no improvement when I moved the copper/brass to the middle or end of the strip.
Tbg, Thats what I thought that the shorting plugs were not to be used on outputs.

So, I sent an email to the gent selling some of these shorting plugs on Audiogon, here is a portion of his reply.
_________________
"Hi, Thank you for your inquiry. The digital-terminators can be uses on in- and outputs. The analog-terminators "shorties" can only be used on inputs - never on outputs! "

Then I dug up a review of the Digital Shorting plugs.

From a review of the digital shorting plugs.
___________
"Now this one is completely new to me – both the concept and the application. The explanation for its effectiveness is somewhat different; it aims to combat not RFI but internal ‘reflections’ from unused S/PDIF in/outputs on CD players, transports and DACs, these claimed to interfere with the main output signal"

__________________________
I had some old RCA shorting plugs , some marked Digital and other analog. I used the the digital ones in both my CD Players input and output and it was a marked improvement. Putting copper sleeves over the Shorting plug dulled the sound.
When I pulled the copper sleeves off of the shorting plugs the CD player glitched and froze.
I unplugged and replugged the player and all is well, but I am not using the copper sleeves over the shorting plug..
Ozzy, I suspect there is a resistor in terminal and digital shorting plugs or that they are merely covers, such as those by Cardas.
There is a resistor.

"A 75 Ohm resistor within an RCA phono plug for the termination of the unused digital output or input can avoid this problem. The result is a more accurate, cleaner and well-balanced sound."
I wish they had chosen another name rather than shorting plug. People are going to put real shorting plugs into output and damaging their electronics.