Getting FM from my speakers without a receiver???

Wow, I had the same thing happen to me this evening. Assumed it had something to the phono pre to pre amp cable I swapped out before my listening session. Sounded like one of the political guys from Fox News. It was very clear and a single broadcast. I read through the link Almarg posted above and will pursue a few of the ideas if I continue to have issue. What a small world.

If this happens only when the preamp is switched to phono, try a different set of cables to see if the RFI goes away. You may need shielded low capacitance cables between your tt and preamp.

OK so here is the update. I switched from my Linn preamp to a spare Parasound I have and the FM went away! The cables from the Basis TT to the pre amp appear to be pretty cheap and unshielded. So now I wonder if I rewire the TT cable wll th RF go away???

Sounds like a good bet to me. Unshielded phono cables strike me as an invitation to this kind of problem, considering the low signal levels and high gain factors that are present.

I would suggest, though, that you verify that you don't hear the radio signals with the Linn preamp when nothing is connected to its phono inputs, and/or with shorting plugs connected to its phono inputs if you have them available.

The different results between the two preamps are likely due to the happenstance of the different characteristics of their input circuits -- one demodulates the rf signal and one does not.

Also, similar to the discussion in the other thread that I linked to, I suspect that you are really hearing am, not fm. I can't envision a means by which an audio system, apart from a tuner, can demodulate an fm signal.

Regards,
-- Al

I had to get rid of all my amalgam fillings for this very reason.

Congrats on tracking it down. The better cable suggestion should show a result.

The AM band is fairly long wavelengths, so I'm sure that changing 'antenna' orientation would help, but that should also be tried.
You could also try secondary shielding OVER the offending cables. Ground it at only 1 end.